Steel Tube Nuts And Sleeves Steel tube nuts and sleeves are used when making hard line connections to male AN fit- tings. Line requires a 37° flare for proper sealing. Package of 4. ALL50300..... -3 Tube Nut ALL50310 ..... -3 Tube Sleeve Aluminum Tube Nuts And Sleeves Aluminum tube nuts and sleeves are used with corresponding hard lines to connect to male AN fittings. Line requires a 37° flare for proper sealing. Package of 2. Size (Female) For Tubing O.D.
90° Swivel AN Fitting Black anodized aluminum fitting swivels a full 360° for convenient hose connection. 1/8"NPT fitting is commonly used in after- market calipers, gauge panels or anywhere a swivel connection would be useful.
ALL50300
ALL50108..... 1/8"NPT to -3AN ALL50109 ..... 1/8"NPT to -4AN AN Union Fittings Black anodized aluminum flare union adapter fittings are commonly used to connect two hoses with female AN ends.
ALL50310
ALL50320
ALL50090 .... -3AN to -3AN ALL50091..... -4AN to -4AN AN Bulkhead Fittings
ALL50330
Tube Nut Tube Sleeve
-3 -4
3/16"
ALL50320 ALL50321
ALL50330 ALL50331
1/4"
ALL50092 ALL50093
Black anodized aluminum bulkhead adapters are perfect when plumbing needs to pass through a firewall, inte- rior panel or a mounting bracket. ALL50092..... Straight -3AN to -3AN ALL50093..... Straight -4AN to -4AN ALL50094..... 90° -3AN to -3AN ALL50095..... 90° 4AN to -4AN ALL50096..... Tee (Run) 3AN (3x) ALL50097..... Tee (Run) -4AN (3x) ALL50098..... -3AN Bulkhead Nut ALL50099..... -4AN Bulkhead Nut Bulkhead Mounting Tab ALL60093 One-piece steel
37° Flaring Tool ALL11016
This -AN fitting flare tool is essential when working with 37° flared fit- tings. Tool for use with soft copper, aluminum and brass tubing will precisely flare from -3 to -10 and 3/16" to 5/8".
ALL50094 ALL50095
ALL50096 ALL50097
Quick Disconnect Couplings 2-piece couplings allow lines to be separated without loss of fluid or
mounting tab with 7/16" hole can be bolted to the chassis or rear end to hold bulkhead fittings in place. Bracket is 5/64" thick.
1"
1" Square
requirement of bleeding. Commonly used on brake systems when changing front or rear axle assembly, hydraulic wing cylinders, a hydraulic clutch system using a hydraulic throw out bearing or when servicing a transmission with an internal hydraulic clutch.
ALL50215
Mounting Tab shown with
ALL50093 -4AN Straight Bulkhead
ALL50212 ALL50213
Fitting and ALL50099 Bulkhead Nut.
Retainer Clamp ALL68326 Steel clamp is designed to fit around 3" O.D. axle tube and mount other brackets or keep brackets in place. Lightweight clamp has 1/4" mounting hardware and a powder coated black finish.
ALL50209
ALL50215 ..... Steel Coupling With 1/8"NPT Female Threads ALL50212 ..... Alum. Coupling With -3AN Male Threads ALL50213 ..... Alum. Coupling With -4AN Male Threads ALL50209..... Premium Coupling Fitting With -3AN Male Threads
Half Clamp Brackets Unique brackets are a must when clamping completely around tubing isn’t possible. Bracket clamps just over halfway around tubing and tightens to create a secure mount for many accessories. 3" bracket can clamp to rear end axle tubes to neatly secure braided lines. Brackets have 3/8" mounting holes. ALL10464 ..... 1-1/4" ALL10468...... 1-3/4" ALL10466 ..... 1-1/2" ALL10470 ...... 3"
ALL10464
Darrell Lanigan
Photo: JohnnyB Imagery
www.allstarperformance.com
36
Made with FlippingBook flipbook maker