8-Point Roll Bar Kits Kits increase safety and the struc- tural integrity of the vehicle. Main hoops are custom bent to fit
Roll Cage Kits For Dodge Neon And Ford Focus Cage kits are designed with safety in mind for mini
each application precisely. Hoop and bars constructed of .134" mild steel,
enduro and four cylinder classes. These cages are built specifically for Dodge Neon and Ford Focus cars. Kits are constructed of .095" wall x 1-3/4" mild steel tubing and include a main hoop, halo, windshield
1-3/4" diameter tubing. Welding required. Floor plates sold separately for unibody cars. 8-Point Roll Bar Kits ALL22600..... Camaro/Firebird 1967-69 ALL22601..... Camaro/Firebird 1970-81
Kit Shown Assembled
posts, front and rear dash bars, three door bars for the left side, and a Z-bar for the right side. Kits also include the components to build a sturdy founda- tion for installing the main cage, similar to the ALL22650. Welding required. Kit Shown Assembled
ALL22602..... Camaro/Firebird 1982-92 NEW! ALL22603..... Camaro/Firebird 1993-02 NEW! ALL22604..... Camaro 2010-15 ALL22608..... G-Body (Monte Carlo, Cutlass, Regal, Grand Prix) 1978-88 ALL22610 ..... Mustang/Capri 1979-93 10-Point Roll Cage Kits
ALL22097..... Dodge Neon ALL22098..... Ford Focus
Mini Stock Roll Cage Kit For Ford Escort ALL22104 Designed with safety in mind for mini enduro design is built for two or four door 1991-2002 Ford Escort bodies. Kit is constructed of .095" wall 1-3/4" mild steel tubing and includes a main hoop, halo, windshield posts, front and rear dash bars, three door bars for the left side, and a Z-bar for the right side. Also included are two lengths of 1-3/4" tubing to weld to the factory pinch welds and two lengths of 1-1/2" tubing to connect the two sides, creating a solid foundation for the cage and seat mount. and four cylinder classes. Universal
Kits increase safety and the structural integrity of the vehicle. Main hoops are custom bent to fit each application precisely. Hoop and bars constructed of
.134" mild steel, 1-5/8" diameter tubing. Welding required. Floor plates sold sepa- rately for unibody cars. 10-Point Roll Cage Kits ALL22620..... Camaro/Firebird 1967-69 ALL22621 ..... Camaro/Firebird 1970-81
Kit Shown Assembled
Kit Shown Assembled
D
ALL22622..... Camaro/Firebird 1982-92 NEW! ALL22623..... Camaro/Firebird 1993-02 NEW! ALL22628..... G-Body (Monte Carlo, Cutlass, Regal, Grand Prix) 1978-88 ALL22630..... Mustang/Capri 1979-93
Floor Plates ALL22640 Bolt or weld these steel plates to the floor pan as required by most
sanctioning bodies when installing roll bars into unibody cars. Increase the structural integ-
“A” “B” “C” “D” 53.5" 24.5" 36.5" 40"
Replacement Part ALL22113 ..... Door Bar
rity and provide a solid mounting point for the roll bar. 6" x 6" plates are 1/8" (.125") thick and may also be used for a variety of other uses including fabricating brackets or mounts. Package of 6.
Strut Bars ALL22642 Strut bars increase the rigidity
and strength of a chassis eliminating flexing and increasing reaction times. Bars can be installed to upgrade existing ten point cage kits or when building a new chassis.
Pre-bent to fit a variety of applications, bars are 65" long overall with a 14" leg and constructed from 1-5/8" x .134" wall mild steel tubing.
Wayne Stack
Photo: RW Motorsports
www.allstarperformance.com
43
Made with FlippingBook flipbook maker