Standard Roll Cage Kits Kits include all pieces to assemble a standard cage. Mild steel tubing is 1-3/4" x .095" wall, is notched and has uniform bends. Four driver’s side curved door bars, “Z” type right side door bar and gussets are included. Measurements
Deluxe Roll Cage Kits Kits include all pieces to assemble a Deluxe Roll Cage. Main hoop is fitted and tack welded together allowing for changes pillar to increase driver visibility. Halo is curved and gusseted into the main hoop for maximum width, driver clearance and support. Mild 1-3/4" x .095" wall steel tubing is notched and has uniform bends. Other features include four curved and one straight driver’s side door bars, “Z” type right side door bars, additional lower cross bar added to main hoop or custom seat mounts. Curved windshield posts fit closer to windshield
D
are outside- to-outside.
Kit Shown Assembled
Kit Shown Assembled D
B
Part No.
Description
“A” “B” “C” “D”
C
for added side support and assist in seat mounting, and a center halo support. (“A”, “B”, “C” and “D” measurements are outside-to-outside.) Part No. Description “A” “B” “C” “D” ALL22100 ’78-88 GM Metric Chassis (Monte Carlo, Regal, Etc.) ’70-81 Camaro/Firebird 54" 28" 41" 44" ALL22102 ’70-77 Monte Carlo, Chevelle, Malibu, Etc. 55" 28" 41" 44" ALL22105 ’77-90 Caprice/Impala 57" 28" 41" 47" ALL22106 ’79-93 Mini Stock Mustang 52.5" 28" 40" 42" A
ALL22101 54" 28" 41" 42" ALL22103 ’70-77 Monte Carlo, Chevelle, Malibu, Etc. 55" 28" 41" 44" ALL22107 Mini Stock Universal 49" 28.5" 47" 39" Mini Stock Roll Cage Installation Kit ALL22650 ’78-88 GM Metric Chassis (Monte Carlo, Regal, Etc.) ’70-81 Camaro/Firebird
Universal installation kit for mini stock or front wheel drive cars provides a solid base or foundation to mount a roll cage. Kit includes two 60" long 2" x 2" square
outside rails, two 54" long 1-3/4" round support tubes for securely mounting the cage and an additional foot area support. Right Hand Jack Post Kit ALL22111 Bolt-on kit fits most Howe, Port City, Lefthander, Finish Line and other offset chassis requiring a jack post to raise vehicle. Includes an assembled bar loop with lift post and pre- cut mounting bars to be welded in place. The mounting bars then bolt to chassis tabs (not included) for removal and installation.
Offset Deluxe Roll Cage Kit Ideal for use with
template style or ABC bodies. Perimeter frame
Kit Shown Assembled
mount roll cage has the same features as other Allstar deluxe kits but includes an offset main hoop and a narrow halo for cars with an offset body or narrow roof.
Door Bar Components For Rocket Dirt Late Models ALL22390/22391 three-point
door bar mounts are con- structed of 1" steel tubing and bolt to the frame. Each mount has a pre-welded sleeve sized to accept posts of the ALL22392 steel door bar.
Part No. “A” “B” “C” “D” ALL22109 Offset Kit 54" Wide Frame 54" 28" 41" 31" ALL22099 Offset Kit 57" Wide Frame 57" 28" 41" 35" Description
ALL22390..... Front Door Bar Mount ALL22391..... Rear Door Bar Mount ALL22392..... Right Door Bar, 5' L x 1-1/4"
www.allstarperformance.com
44
Made with FlippingBook flipbook maker