Door Bar Clamp ALL14198 Clamp fastens around a 1-1/2" door bar, allowing a steel door plate to
Steering Column Brackets Stamped-steel brackets weld to dash bars to create a mounting point for steering shaft when using a 3/4" oversized rod end. Brackets are 3-1/8" wide and available
be mounted to the outside of the door bar area. Clamp eliminates the need to weld mounting tabs or door plate directly to a finished chassis. Sold each and includes 1/2" mounting hardware.
in a variety of lengths to fit most applica- tions. 4" and longer brackets are pre- notched for 1-1/2" dash bars but are easily modified to fit other size bars. ALL52120 ..... 2-1/2" Long
Steel Plate Steel plate is useful for many building projects or fabricating brackets. 10 gauge (1/8" thick) 1011 mild steel plate is ideal for adding a protective cover to the driver’s side floor or door bar area of circle track cars.
ALL52122 ..... 4" Long ALL52124 ..... 8" Long ALL52126 ..... 10" Long Steering Shaft Rod End Mounting Tab ALL52133
Gusseted weld-on tab provides an excellent mounting point for the 3/4" oversized rod end (ALL52132) when building custom steering shaft assemblies. Tab is designed to cradle into round chassis tubing with built-in gussets adding strength and reducing flex. Related Item ALL52132 ..... Oversized 3/4" Rod End Kit Steering Quickener Bracket ALL60028 Mounts all popular steering quickeners including AFCO, Coleman, Howe and
ALL54070..... 18" x 26" ALL54071..... 24" x 24" ALL54072..... 24" x 36"
Door Plate ALL22118 Plates can be welded between the driver’s side door bars. May also be used to box “C”-type frame rails to
add support and strength at critical roll cage mounting points. Plate is 48" x 4" x 1/8" thick and mandated by most sanctioning bodies and tracks.
others. Bracket has two holes, spaced 1-3/4" apart, and may be welded to 1-1/2" or 1-3/4" diameter tubing.
Curved Door Bar ALL22114 Curved door bar is constructed of 1-3/4" O.D. x .095"
Floor Pedal Plate ALL54050 Weld-in pedal plate is 23" x 5" x 1/8" and speeds up race car construction by providing the proper spacing for mounting pedal/master cylinder assemblies.
wall mild steel tubing and is the same door bar included in Allstar’s Standard and Deluxe roll cage kits. Bar is notched to fit between two vertical posts spaced 43" on center and adds approximately 6" to the width of the cage. Door Bar Spacers Spacers fit between two door bars for added support and to equally space door bars apart. Constructed of 1-3/4" O.D. x .095" wall mild steel tubing. ALL22115 ..... 4" Spacer, spaces door bars 3" apart. (These bars are included in Allstar Standard and Economy Roll Cage Kits) ALL22116 ..... 5" Spacer, spaces door bars 4" apart. (These bars are included in Allstar Mini Enduro Kits) Swing Out Door Bar Kit ALL22670
Hanging Brake Pedal Mount ALL54060 Welds to chassis to mount Wilwood and Tilton style hanging pedals. Notched to clear balance bar.
Kit includes hardware and mounting brackets needed
when installing a swing out style door bar on roll bar equipped car. Kit includes mild steel brackets, spacers, quick release T-handle pin and mounting hardware.
Jimmer Kline
Photo: JohnnyB Imagery
www.allstarperformance.com
45
Made with FlippingBook flipbook maker