Universal Seat Mount Kit ALL22110 1-1/2" diameter x .095" wall mild steel tubing attaches to roll cage, to safely and effectively mount a seat. Use with Allstar roll cage kits. Kit is sold unassembled and requires welding.
Universal Front Hoop ALL22108 Front support kit adds strength to the front section of race car by reducing excessive flex. Pre-cut and notched pieces of 1-3/4" x .095" wall mild steel tubing fasten to the existing roll cage and extend to the front of the chassis to strengthen vulner- able steering and radiator areas. Lower radiator mounting brackets are included. Kit requires the addition of two front arch sup-
Lower Seat Mount ALL60070
Mount attaches through floor pan to a bar or plate attached to
the left frame rail or roll cage for seat and anti-sub belt mounting. Mount is 2-3/4" tall and seat tabs are welded at a 15° angle to the floor mounts. Seat Mount Brackets Made from 1/8" thick mild steel. Upper bracket is angled to fit against the back of most aluminum racing seats. Two-piece design allows front-to-back and side-to-side adjust- ment. Upper mount brackets may be bolted or welded. Lower mount welds to 1-1/2" or 1-3/4" tubing. ALL60032..... Upper, 2-Piece ALL60033..... Lower Double Shear Seat Belt Tab ALL60031 Bracket welds to chassis for solid seat belt mount to the chassis, yet still able to pivot. Double shear design provides twice the strength of a single tab style mount. Steel bracket accepts 1/2" hardware. Narrow Front Arch Support ALL22645 Arch supports replace the front arches found on many asphalt late models and modifieds or when fabricating a new chassis. Narrow triangular design arches are constructed of 1-3/4" x .095" wall, D.O.M. steel tubing, are 30" wide at the mounting points and 17" tall, but may be trimmed to fit many appli- cations. Sold as a pair* *LH support features a small kick out for added header clearance. Front Arch Support ALL22119
ports (ALL22119) sold separately to complete installation. Some modifications may be required for installation.
Universal Mini Stock Front Hoops Universal front hoops come in 3 widths to fit a variety of mini
ALL22652
ALL60032
NEW!
stock chassis. Mild steel tubing is 1-1/2" x .083".
ALL60033
Part No. ALL22652 ALL22653 ALL22654
Outside Width
Car Type
40-1/2" 46-1/2" 51-1/4"
Mid-Size
Neon
Big
Universal Rear Support ALL22112 Rear support adds strength to the rear section of race car by reducing excessive flex. Kit includes pre-cut and notched pieces of 1-3/4" x .095" wall mild steel tubing which fasten to the existing roll cage and extend to the rear of the chassis. Some modifications may be required for installation.
Fuel Cell Guard ALL22374 Guard adds protec-
tion to the fuel cell and acts as a lifting point for rear of vehicle. Universal kit is constructed of 1-3/4", .095" wall, mild steel tubing. Parts are pre-cut and notched, ready to be welded together. Height is 8-3/4" and mounting width is 42".
Arch supports are required when installing Allstar front support kits. They add strength to suspension
mounting area and create mounting points for shock brackets. Arches are constructed of 1-3/4" x .095" wall mild steel tubing, 24" wide at the mounting points and 16" tall but may be trimmed to fit many applications. Sold each.
Frame Repair Plate For Metric Chassis ALL60085
1/8" steel rear frame plate fits 1978-88 GM metric cars. Plate is cut to fit stock frames and measures 4-1/4" x 27".
www.allstarperformance.com
46
Made with FlippingBook flipbook maker