GM Metric Chassis Trailing Arms New, stamped steel, C-channel arms are strong and sturdy. Improve handling of the rear suspension on 1978-88 GM Metric chassis by replacing twisted or worn
GM Metric Chassis Trailing Arm Bracket Kits Bracket kits include rear upper and lower control arm mounts that accept O.E. style bushings (included) and 1/2" hardware. Upper mount must be cut into two pieces (LH/
ALL57820
RH) and trimmed to desired height depending upon where housing is located in the chassis.
ALL57822
out trailing arms. Sold each. ALL57820..... Upper, 2.6 Lbs. ALL57822..... Lower, 3.6 Lbs.
Adjustable GM Metric Chassis Trailing Arms
ALL99282
ALL60052 ALL99282
ALL60052
ALL57824
Adjustable steel 1978-88 G-body Metric upper and lower rear end trailing arms are complete with left and right 3/4" rod ends, step spacers reducing to a 1/2" hole and cut to fit stock GM type
ALL57826
ALL60053
ALL99283
ALL60053 ALL99283
mounts. Upper arm aids in adjusting pinion angle and centering rear end. Lower arm will adjust wheel base.
ALL57824..... Upper ALL57826..... Lower Replacement Parts
ALL99320..... Clevis End For ALL57824 ALL99321 ..... Rod End Bushings, 2-Pack
ALL99321
ALL60054 ALL99284
ALL99284
ALL60054
Universal Trailing Arm Brackets Brackets have three 1/2" mounting holes spaced 1-1/4" apart and may be welded to 3" axle tubes to
ALL60052..... Kit With Single Hole Lower (Stock Location) ALL99282..... Lower Brackets Only, (Stock Hole Location) ALL60053..... Kit With Single Hole Lower, (1"Lowered) ALL99283..... Lower Brackets Only, (1" Lowered Hole Location) ALL60054..... Kit With Multi-Hole Lower (Stock to 4" Lowered) ALL99284..... Lower Brackets Only, (Multi-Hole) 90/10 Shock Brackets ALL60026 Brackets weld to the chassis to mount a shock between the chassis and the dif- ferential to control “unloading” during deceleration of hard braking. 1/8" thick steel brackets fit 1-1/2" diameter tubing and have four 1/2" holes, spaced 1" apart. One pair.
provide three trailing arm mount locations. ALL60058 is made of
ALL60050
ALL60051
ALL60058
3/16" steel and welds to the top of the rear end housing, providing a point of attachment for upper trailing arms. ALL60050..... Lower Bracket ALL60051..... Shock Bracket For Lower ALL60058..... Upper Bracket
Metric Upper Trailing Arm Mounts ALL60059 Mounts weld to the top of Ford 9" housing NEW!
Upper Link Chassis Brackets
Weld-on brackets have curved 3/4" slots to maintain pinion angle as the 3rd link is raised or low- ered. Both brackets are notched for 1-3/4" round tubing and are 3/16" thick.
creating a mounting point for GM Metric chassis upper trailing arms. Bushings not included.
ALL60065
ALL60066
ALL60065..... Short ALL60066..... Long
www.allstarperformance.com
57
Made with FlippingBook flipbook maker