Accessory Clamps Aluminum two-piece clamps are ideal for mounting small parts and accessories or creating an adjustable clamp- on mount for supporting body or roof panels. Clamps are 1/2" wide and include two 1/4" button head fasteners. ALL10456
Economy Ballast Brackets Black anodized two-piece aluminum bracket clamps around tubing with 5/16" hex head fasteners and has a 1/2"-13 tapped hole on each side. Mounting stud and nut sold separately. ALL14192...... 1" O.D. Round Tubing ALL14193...... 1-1/4" O.D. Round Tubing ALL14194...... 1-3/8" O.D. Round Tubing ALL14195...... 1-1/2" O.D. Round Tubing ALL14196...... 1-5/8" O.D. Round Tubing ALL14197...... 1-3/4" O.D. Round Tubing Ballast Brackets Black anodized two-piece aluminum bracket clamps around tubing with recessed 5/16" socket head fasteners and has a 1/2"-13 tapped hole on each side. Mounting stud and nut sold separately. ALL14178...... 1" O.D. Round Tubing ALL14183...... 1-1/4" O.D. Round Tubing ALL14184...... 1-3/8" O.D. Round Tubing ALL14185...... 1-1/2" O.D. Round Tubing ALL14186...... 1-5/8" O.D. Round Tubing ALL14187...... 1-3/4" O.D. Round Tubing
ALL10488
ALL14195
With 1/4"-20 Mount And A 1/4" Through Hole
Size With 1/4"-20 Mount
1"
ALL10455 ALL10456 ALL10457 ALL10458 ALL10460 ALL10459
ALL10485 ALL10486 ALL10487 ALL10488 ALL10489 ALL10490
1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4"
Universal Brackets Universal 1/4" thick aluminum
brackets may be drilled and tapped to custom mount just about anything. ALL10452 ..... 1-1/4" ALL10453 ..... 1-1/2" ALL10454 ..... 1-3/4" ALL10445 ..... Reducer Bushing 1-3/4" to 1-5/8"
ALL14187
ALL10452
Steel Ballast Steel ballast is pre- painted white for safety. Add weight where it’s needed. Available in 10, 20, 25, 30 and 40 pound blocks.
ALL14188...... 2" O.D. Round Tubing ALL14189...... 2" x 2" Square Tubing
Threaded Stud And Lock Nut For Mounting Ballast ALL14190 1/2"-13 x 6" threaded rod is
ALL14215
often used with clamp-on ballast brackets when mounting ballast or may be used to bolt ballast directly to frame or chassis. Threaded rod may be cut to desired length and includes a nylon lock nut and flat washer. Fuel Cell Mounting Bracket ALL60063 Steel bracket is radiused to fit 1-1/2" tubing and has (8) 3/8" holes on 1/2" centers. Bracket is .085" thick and 1-1/2" wide x 4-3/4" tall. Fuel Cell Mounting Brackets Steel brackets are .125" thick, 1-3/4" wide and avail- able in three lengths. All have 3/8" holes.
ALL14212...... 10 Lb. 2-1/2" x 2-1/2" x 5-5/8" ALL14214...... 20 Lb. 2-1/2" x 2-1/2" x 11-3/8" ALL14215...... 25 Lb. 2" x 4" x 11" ALL14218...... 30 Lb. 2-1/2" x 3-1/2" x 12" ALL14220 ..... 40 Lb. 2-1/2" x 3-1/2" x 16-1/4" Ballast Add weight where it’s needed. ALL14176...... 2.5 Lb. 3-1/2" Round x 3/4" Tall ALL14177...... 5 Lb. 3-1/2" Round x 1-3/8" Tall ALL14180...... 25 Lb. 4" x 8" x 2" ALL14179...... 30 Lb. 2-1/2" x 2-1/2" x 12" ALL14182...... 40 Lb. 12" x 3-1/2" x 2-1/2" Clamp-On 25 Lb. Ballast ALL14181 Securely add weight where it’s needed. Clamp-on design is formed of two halves which bolt together around 1" to 1-3/4" round tubing, allowing easy installation ALL14177
ALL14180
ALL60060..... 2" Long ALL60061..... 3" Long ALL60062..... 4-3/4" Long Fuel Cell Guard ALL22374 Guard adds protection to the fuel cell and acts
and removal. Bolts are included for use on tubing up to 1-5/8". When clamping to 1-3/4" tubing, longer bolts (not included) are required.
as a lifting point for rear of vehicle. Universal kit is con- structed of 1-3/4" x .095" wall, mild steel tubing. Parts are pre-cut and notched, ready to be welded together. Height is 8-3/4" and mounting width is 42".
www.allstarperformance.com
59
Made with FlippingBook flipbook maker