Radiator Honeycomb Honeycomb screen mounts to front of radiator to protect from rocks and debris. Secure directly to radiator using ALL30085 mounting kit, sold
Radiator Caps Higher cooling system pressure raises the boiling point of coolant to reduce the risk of overheating. Standard size caps fit 2-1/8" O.D. x 3/4" deep necks unless otherwise noted. Recovery system caps allow coolant to exit the cooling system into an overflow or recovery bottle as coolant heats and expands. As the system cools, recovery system caps will draw coolant back in to keep the cooling system full. Non-recovery system caps allow coolant to exit the system, but do not draw coolant back into the system.
ALL30129
separately. 19" x 26". ALL30158 ..... 1/2" Thick ALL30159 ..... 1" Thick
ALL30136
Universal Mounting Kit ALL30085 Mounting kits are commonly used to mount electric fans, oil coolers, transmission coolers or honeycomb screen directly to a radiator. Kits include four 8" nylon mounting bolts with washers, rubber spacer blocks and retaining nuts. Bolts are pressed through the fins of the radiator to mount accessory.
ALL30128
Part No. Description
Pressure
*Non-Recovery Radiator Caps ALL30134 Stant Round
18-22 PSI 21-25 PSI 28-32 PSI
ALL30135 Stant Round ALL30128 Stant Round
Radiator Shaker Screen ALL30160 Commonly used on Dirt Late Models, universal shaker
*Recovery System Radiator Caps ALL30132 Stant Round ALL30133 Stant Round With Lever ALL30130 Stant Round With Lever
16 PSI 16 PSI
screen is mounted in front of the radiator on most dirt cars. Unit includes black powder coated aluminum frame, screen, 1/2" x 32" cross rod, springs and retaining clips. Frame dimensions are 17" tall and 25" wide.
18-22 PSI 21-25 PSI 21-25 PSI 22-24 PSI 29-31 PSI 38-42 PSI
ALL30137 Stant Octagon
ALL30131 Stant Round With Lever
ALL30136 Round ALL30129 Round
ALL30138 Stant Octagon
*Small Diameter Recovery System Radiator Caps ALL30124 Stant Round Small Dia. (32mm I.D., 16mm deep) 16 PSI ALL30125 Stant Round Small Dia. (32mm I.D., 16mm deep) 19-21 PSI ALL30126 Stant Round Small Dia. (32mm I.D., 16mm deep) 28-32 PSI *Warning: High pressure radiator caps are made for use on race vehicles only. Do not use these caps on passenger vehicle cars with stock type radiators. It is recommended to pressure test the complete cooling system to the maximum level of pressure indicated on the cap. Failure to test cooling system to the proper pressure prior to installing the cap may result in damage to the cooling system and/or bodily injury.
Sprint Car Radiator Rock Screen ALL30163 Aluminum rock screen helps to protect radiators from heavy rocks and mud. Mounting tabs are integrated into the frame for quick and easy installation to the front air box. Measures 20-1/2" wide x 12" tall and weighs just under 1 lb. Quick turn springs are included.
Billet Aluminum Radiator Cap ALL30139
Stainless Wire Screen Use screen to protect radiators, oil coolers or other items. Size referenced is the approximate opening of the screen. 5/64" (.025" Wire Diameter)
Polished billet aluminum cover is permanently pressed onto a 16 lb. recovery style radiator cap for enhanced appearance within any engine compart- ment. Cap is a suitable choice for most street driven vehicles. Radiator Tank Heating Pad ALL76420 Fasten pad directly to the side of radiator tank to help add heat to your engine on cool nights. 2" x 15" high temperature silicone heating pad externally pre-heats coolant in the radiator and reduces overall warm up time. Note: Additional pads are located in the Engine section for oil pan and oil tank applications to add additional heat to the engine before start-up.
ALL22260..... 12" x 36" ALL22262..... 36" x 36" 1/8" (.035" Wire Diameter) ALL22265..... 12" x 36" ALL22267..... 36" x 36" ALL22268..... 36" x 48" 3/16" (.047" Wire Diameter)
5/64"
1/8"
ALL22270..... 12" x 36" ALL22272..... 36" x 36" ALL22273..... 36" x 48"
3/16"
www.allstarperformance.com
67
Made with FlippingBook flipbook maker