Heat Shrink Tubing Single wall
Test Light ALL76215 Quickly diagnose electrical problems by testing for current in electrical
tubing is placed over wiring and electrical connec- tors to seal and strengthen elec- trical connections. Tubing is pre-cut
circuits, relays, switches or fuses. Handheld test light
has a 36" lead wire with an insulated clip which fastens to a common ground and a sharp piercing point to probe insulated wire or terminals. Indicator light illuminates to identify powered circuits in 6-12V systems.
to 6" and has a 2:1 shrink ratio, meaning this with shrink to approximately half the size when heat is applied using a heat gun or other heat source. Heat Shrink Assortment Kit ALL76160 ..... Includes 9pc of 1/8" and 3/16", 6pcs of 1/4" and 3pcs of 3/8" and 1/2" Individual Sizes (Pack of 20) ALL76162 ..... 1/8" ALL76165 ...... 3/8" ALL76163 ..... 3/16" ALL76166...... 1/2" ALL76164 ..... 1/4" ALL76167 ...... 3/4"
Nylon Tie Wraps Secure electrical wiring, gauge lines and roll bar padding. 100 per bag. Nylon tie wraps are available in black, natural, red, blue, yellow and purple nylon. Black Red ALL14120...... 3-3/4"
ALL14126 .......... 7-1/4" ALL14127 .......... 14-1/4"
ALL14122...... 6"
Blue
ALL14123...... 7-1/4" ALL14124...... 11-1/4" ALL14125...... 14-1/4"
ALL14128 .......... 7-1/4" ALL14129 .......... 14-1/4"
Grommet Set ALL18360 Grommets are perfect for protecting wiring and hoses that pass through panels up to 1/16" (.062") thick. Kit
Natural
Yellow
ALL14130...... 3-3/4"
ALL14136.......... 7-1/4" ALL14137 .......... 14-1/4"
ALL14132...... 6"
Purple
ALL14133...... 7-1/4" ALL14134...... 11-1/4" ALL14135...... 14-1/4"
includes 36 grommets (6 of each size: 1/4", 5/16", 3/8", 1/2", 5/8" and 11/16"). Grommets are also available in size specific 10-packs. Part No. Grommet Hole I.D.
ALL14138.......... 7-1/4" ALL14139.......... 14-1/4"
ALL11041
Nylon Flush Fit Tie Wraps Flush fit design ties have the excess portion of the tie exit in the same direction as the original tie, helping to eliminate the protruding sharp portion remaining as found in stan- dard ties. Package of 100. ALL14395 ..... 8" Long ALL14396 ..... 11" Long Nylon Tie Wraps With Mounting Holes Built-in tab with mounting hole to easily secure wiring harnesses, hoses or cables to a panel with rivets or other fasteners. Package of 25.
Panel Hole I.D.
ALL18362 ALL18363 ALL18364 ALL18365 ALL18366 ALL18367 ALL18368
3/16"
5/16"
1/4"
3/8"
5/16"
7/16"
3/8" 1/2" 5/8"
1/2" 5/8" 7/8"
11/16"
1"
Step Drill Sets Drill multiple size holes with one bit. Drill sheet metal and aluminum without deforming or distorting. Bits start on contact, deburr, and chamfer while drilling, and do not require a center punch. Titanium nitride coated high speed steel. 1/4" shank. ALL11040 (3-Piece Set) Drill Bit Sizes Six Step 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" Nine Step 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" Thirteen Step 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2" ALL11041 (2-Piece Set) Drill Bit Sizes Eleven Step 1/4", 25/64", 35/64", 11/16", 13/16", 7/8", 1", 1-1/8", 1-7/32", 1-1/4", 1-3/8" Twelve Step 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"
ALL11041
ALL14390 ..... 8" With #10 Hole ALL14391 ..... 11" With #10 Hole ALL14392 ..... 14" With 1/4" Hole
Wire Tie Mounting Bases Self-adhesive mounting bases provide a location for attaching standard wire ties to secure wiring, cables and hoses. Bases mount to clean flat surfaces and accept 75# and smaller wire ties. Package of 10.
ALL14116 ...... 3/4" x 3/4" Mounting Base ALL14117 ...... 1-1/8" x 1-1/8" Mounting Base
www.allstarperformance.com
78
Made with FlippingBook flipbook maker