6-Circuit Fuse Block ALL76180 This fuse block is a great power distribution starting point for
30-Amp Relays Relays are commonly used to control higher amperage components such as electric fuel pumps, cooling fans or water pumps rated up to 30 amps. Relays allow the use of a lower amp switch to turn on or control a component with a higher amp draw. A con- nector with a wiring harness and installation instructions are included. ALL76186 ..... Standard Relay ALL76188 ..... Weatherproof Relay Plunger Style Brake Light Switch ALL76253
up to six individual circuits which are protected by ATC/ ATO style fuses (sold separately). Block fea-
Fuses not included.
tures a #10 power supply and six 1/4" male spade terminals for individual circuit connections. Fuse block is rated at 150 amps at 12 volts, maximum of 25 amps per circuit.
Fuse Terminals Terminals attach to cartridge style fuses installed in fuse blocks to create an additional circuit to
Popular two terminal brake light switch found in most vehicles from the 1950’s to today. Ideal
ALL76090
ALL76091
power accessories. Terminals slide over the protected leg or “fused” side (side of fuse block that does not have power when fuse is removed) of the fuse. Package of 5. ALL76090..... Mini Fuse Style Terminal ALL76091 ..... ATC/ATO Fuse Style Terminal
for most applications, switch is spring loaded to the on position and turns off when contacted by the brake pedal assembly. Switch has 1/2" threads with jam nuts for easy mounting in a bracket, and two .250" blade type terminals.
Lever Style Brake Light Switch ALL76250 Switch is commonly used with under- floor mounted brake pedal assemblies where switch can contact the brake pedal arm. Spring loaded switch is designed to return to
Buss Bars Buss bars create a remote power source for powering multiple accessories. Bar features a 1/4" power supply stud and 12 sepa- rate #6 connections. Insulated base measures
NEW!
the open position and has two #10-32 tapped mounting holes, 5/8" on centers. Designed for easy two wire con- nection, one "+" supply and the other to power brake lights or a brake light relay. Switch is rated at 4.5 amps and features two male bullet terminals.
5-1/4" x 1-1/8" wide and can be mounted with two #10 (3/16") fasteners. Protective covers are sold separately ALL76170 ..... Red ALL76171...... Red Protective Cover ALL76172 ..... Black ALL76173 ..... Black Protective Cover Junction Block ALL76146 Junction block with single 3/8" stud offers a location to power multiple accessories from one power supply or a common place to locate ground wires. Block features two mounting holes for #8 fasteners for installation on firewall or panel.
Pressure Activated Brake Light Switches Switch is plumbed into the brake system and is activated by closing the electrical connection with rising
ALL76251
ALL76252
brake pressure (60-120 PSI). Designed for easy two wire connection, one "+" supply and the other to power brake lights or a brake light relay. Switches are rated at 4.5 Amps and have 1/8"-27 dry seal mounting threads.
ALL76251 ..... Male Bullet Terminals ALL76252 ..... 6-32 Screw Terminals Brake Pressure Safety Switch ALL76255
30-Amp Circuit Breaker ALL76212 Circuit breaker protects electrical circuits similar to fuses but will cool and self- reset to maintain power to critical items such as headlights or ignition systems. Use circuit breaker to power accessories in
Brake pressure switch is wired into the ignition system and kills power to ignition when a sudden spike in brake pressure is sensed in the event of an accident or emer-
a race car and to keep constant power to ignition. Steel case and mounting bracket provide durability and ease mounting to panels. #10-32 threaded stud terminals include nuts and lock washers.
gency. Switch has an adjustable cut-off pressure from 700-1900 PSI and resets automatically when brakes are released. A weatherproof cover protects the inner adjust- ment screw and seals the 18" long pigtail leads. 1/8"NPT male threads.
www.allstarperformance.com
79
Made with FlippingBook flipbook maker