Street Performance Chevy Mini-Starter ALL80525
Heavy Duty Bert/Brinn Starter ALL80532 Heavy duty starter with a 3HP motor is designed to handle up to 16:1 compression engines.
SB Chevy clockable starter has twelve mounting positions and is a good choice for street engines including crate motors. Starter has 1.4kw permanent magnet and weighs only 7.5 lbs. Clears most kickout oil pans and works with 153- and 168-tooth flywheels or flexplates. Use with compression ratios up to 10.5:1. Mounting bolts and shim kit included. Replacement Parts
Universal Heat Wrap ALL34238 Heat resistant material mea-
sures 7" x 22", making it ideal for wrapping starter motor, or other components that are close to high
ALL80526..... Starter Solenoid ALL80527..... Bolts And Shims Chevy Mini-Starter ALL80520
heat areas. Wrap features a reflective material on one side to protect against radiant heat and includes two 24" long stainless steel tie wraps for securing material.
It’s smaller, lighter and offers sev- eral mounting options. Perfect starter for race cars with clearance problems in the chassis or around header pipes. Chevy 153- and 168- tooth applications. Starter has 1.4kw permanent magnet, weighs just 9.6 lbs. and includes bolts and shims. Replacement Parts ALL80521..... Starter Solenoid ALL80522..... Starter Drive Assembly ALL80523..... Starter Pinion ALL80524..... Bolt And Shim Kit Chevy Mini-Starter ALL80515
Starter Solenoid ALL76203 Ford-style solenoid is perfect for use with high torque racing starters. Flat base eases mounting, and a remote under-hood starter switch or timing light hook-up can be easily adapted.
Solenoid is offered separately, or may be ordered with installation kit (ALL76202) that includes wiring, terminals and hardware.
Solenoid And Installation Kit ALL76202 Relocate starter solenoid away from direct engine heat to provide easy access and eliminate hot start problems common on General Motors vehicles. An under hood starter switch can also be added. Includes standard duty, Ford-style solenoid, mounting screws, terminals
3HP high-torque gear reduction, block mount Chevy mini-starter.
In-line mounting block will fit either 153- or 168-tooth flywheels and has rotation holes for added clearance. Mounting bolts and shim kit included.
GM LS Mini-Starter ALL80516
and wiring kit. Related Part ALL76201 ..... Installation Kit Only Solenoid Jumper Wires Jumper wire completes the circuit to the starter solenoid when using remote mounted solenoids such as ALL76203.
Block mount GM LS gear reduction mini-starter works with 168-tooth flywheels and provides increased starting performance over OE style starters. Starter
features a 3-position mounting block which allows the starter motor to be rotated for additional clearance around exhaust and frame obstructions. A high torque, 3HP motor combined with 3.75:1 gear reduction is ideal for engines with up to 11:1 compression ratio. Replacement Part ALL80521..... Starter Solenoid Bert/Brinn Starter ALL80530 Bert/Brinn Starter can handle up to 16:1 compression. 4.4:1 gear reduction starter has a 1.4kw motor that produces 1.9 hp and 200 ft./lbs of torque.
ALL76208 ..... Jumper Wire With Spade Terminal ALL76209 ..... Jumper Wire With Ring Terminal Remote Starter Button ALL76206 Kit includes a low profile, steel cased foot pedal with 8' cord and assorted wire ends to work with many applications. Provides hands free engine cranking when adjusting valves.
www.allstarperformance.com
82
Made with FlippingBook flipbook maker