CONTROL4 IN-LITE V102
INTRODUCTION in-lite garden lighting is a low-voltage, easy-to-install outdoor lighting system that uses 12V power and a transformer to connect to a standard plug socket. The system is designed to be safe, energy-efficient, and expandable, with a range of fixtures like spotlights, path lights, wall lights, and decorative lights.
DRIVER INSTALLATION
Several driver files are included in the release package.
• • • •
ip_inlite_smart_lamp.c4z
ip_inlite_light_zone.c4z
ip_inlite_scene.c4z
ip_inlite_smart_system.c4z
Copy the above files from the zip package to your Control4 driver location (by default this is Documents\Control4\Drivers). Open Composer and choose the Search tab from the Items pane. Add one instance of the driver ‘in-lite Smart System’ into your project (represents a garden in the in-lite app), along with 1 or more instances of the drivers ‘in-lite Smart Lamp’ and ‘in-lite Light Zone’ (one for each light or zone you wish to control). The lighting drivers will connect automatically to the Smart System driver. If you have multiple Smart Systems (multiple gardens available in the in-lite app), you must ensure that the correct connections are made from the lighting drivers to the Smart System drivers.
DRIVER CONFIGURATION
The Smart System driver deals with all the communications between the C4 processor and in-lite.
In the Connections tab in Composer, enter the IP address of your Controller to connect it to this driver. The Auth token Composer property is required to be filled in to establish comms with the device. The auth token can be found in the in-lite app under Settings > Garden > SMART BRIDGE > Connect with KNX The driver includes discovery functionality. You can run the Auto-Add Detected Drivers action described below, to automatically discover and install required lighting drivers for your system.
Once installed, you should see connections on the INLITE_INTERDRIVER_COMMS binding
PROPERTIES DRIVER STATUS
• Driver Version - Reports the release version of the driver. • Operational Mode - Reports the current driver status.
CONFIGURATION
• Service Name - Used for authentication with the device. • Auth Token - Used for authentication with the device.
DEBUG
•
Debug Mode - For support use only.
• Debug Subsystems - For support use only. • Debug Level - For support use only.
ACTIONS
• Display in-lite Devices - Print out a list of Control4 and in-lite devices in the Lua window • Auto-Add Detected Drivers - This will automatically add and configure lights discovered in the in-lite garden. • Print Rolling Trace - For support use only.
TROUBLESHOOTING NO CONTROL OF THE SYSTEM IS POSSIBLE FROM CONTROL4 • Check that the devices are connected to the network and functioning correctly independently of the driver using the in-lite app. • Check the IP address field of the in-lite Smart System driver matches correct IP address for in-lite. • Check the light and zone drivers are connected to the correct Smart System driver by checking the INLITE_INTERDRIVER_COMMS connection in composer. • Confirm the status of all in-lite drivers reports “OK”. • Check that the correct Smart Lamp names are assigned to each light driver. Check the correct zones are assigned to the light zone drivers. • Try restarting the Control4 processor and/or updating the drivers.
HOW CAN I RECALL IN-LITE SCENES?
Scenes can be recalled in two ways:
1. Install an instance of the in-lite Scene driver, and select the scene you wish to recall. This presents as a switched light driver on the Control4 UI. 2. For any installed in-lite Smart Lamp or in-lite Light Zone driver, press and hold on the lights toggle icon from any Control4 UI, then press on Lighting Extras. From this menu, you can choose any scene to recall.
CONTACT US
If you encounter any issues with the driver, please contact us at https://support.janustechnology.co.uk , and we will be happy to assist however needed.
Page 1 Page 2 Page 3Made with FlippingBook - professional solution for displaying marketing and sales documents online