Promotions.
15
Carpenters Square
Combination Square
StraightEdges SteelStraightEdges DIN874/2
• Steel Straight Edges manufactured in Germany • Deviations of flatness to: DIN 874 & VDI/VDE/DGQ 2618 • Marked with supporting points on side face • Both working surfaces & side faces are fine ground • Each straight edge is individually serialised
• 4 Piece Combination Set • Blade, Square Head, Centre Head & Protractor • Blade is fully hardened and tempered • Hardened steel square head 90 & 45 angles • Hardened centre head • Inch/Metric Rule • Double indexed protractor is graduated 180 degrees in both directions
• Square head & 12”/300mm steel blade • Square head includes a spirit level & scribing point • Steel blade is powder coated & oil resistant • Steel blade is 2mm thick 25.5mm wide
PDF 1042 CLICK FOR
Order Code 7111-012
Description/Size Carpenters Square
Order Code 7127-012H
Description/Size Combination Square
List Price £32.60
List Price £204.00
Offer Price £22.80
Offer Price £136.70
*Carriage Charge Applies
EngineersSquaresSets BS939GradeB(Squareness)
DialBevel Protractor
Order Code 59-010-050
Description/Size 500mm
List Price £59.50
Offer Price £53.50
PDF 1233 CLICK FOR
Order Code 59-010-075
Description/Size 750mm
List Price £94.40
Offer Price £85.00
PDF 1284 CLICK FOR
• Manufactured from high quality steel. • Conform to BS 939 grade B for squareness. • Choice of two sets • Supplied in a rugged blow moulded case
Order Code 59-010-100
Description/Size 1000mm
List Price £116.20
Offer Price £104.60
• One revolution of dial pointer shows angle of 10° • Each angular degree subdivided into 5mins divisions • Inspection window reads 360°with 4 90°sections. • Operating parts are satin finish. • Complete with 6”,8” & 12” stainless steel blades.
Order Code 59-010-150*
Description/Size 1500mm
Order Code 7000-54B
Description/Size 4 Piece Set,2,3,4 & 6”
List Price £230.00
Offer Price £207.00
List Price £95.60
Offer Price £69.80
Order Code 59-010-200*
Description/Size 2000mm
Order Code 7000-S5
Description/Size 4 Piece Set,4,6,9 & 12”
Order Code 51-525-360
Description/Size Dial Protractor
List Price £307.00
Offer Price £276.30
List Price £207.00
Offer Price £151.00
List Price £109.00
Offer Price £76.30
SquareEndDepth GaugeProtractors
RoundEndDepth GaugeProtractors
EngineersSquare BS939GradeB
PDF 1084 CLICK FOR
PDF 1084 CLICK FOR
• Manufactured from high quality steel • Beam & blade ground & lapped for accuracy • Blade is hardened & tempered • Conform to BS 939, grade B for squareness
PDF 1233 CLICK FOR
• Rule dimensions: 150mm/6” long x 5.35mm wide x 1mm thick. • Satin chrome finish. • 5191: Square End with rule 32nds/1mm • 5192: Square End metric rule 0.5/1mm Order Code 5191 Description/Size Square End
• Rule dimensions: 150mm/6” long x 5.35mm wide x 1mm thick. • Satin chrome finish. • 5193: Round end with rule 32nds/1mm • 5194: Round end metric rule 0.5/1mm Order Code 5193 Description/Size Round End
Order Code
List Price
Blade Length
Offer Price
£19.00 £20.00 £23.90 £27.90 £65.00 £94.00 £408.00 £633.00
50mm/2” 75mm/3” 100mm/4” 150mm/6” 225mm/9” 300mm/12” 450mm/18” 600mm/24”
7000-002 7000-003 7000-004 7000-006 7000-009 7000-012 7000-018 7000-024
£11.40 £12.00 £14.30 £16.70 £39.00 £56.40 £245.00 £379.00
Order Code 5192
Description/Size Square End
Order Code 5194
Description/Size Round End
Offer Price £33.80
Offer Price £33.80
List Price £52.00
List Price £52.00
Made with FlippingBook - Online magazine maker