30-Inch Warming Drawer
Appliance Dimensions
Installation Specifications
A - MOUNTING BRACKET WIDTH (IN/CM)
A - CUTOUT WIDTH (IN/CM)
B - CHASSIS WIDTH (IN/CM)
B* - MINIMUM WIDTH TO ADJACENT DOORS/DRAW- ERS (IN/CM) C - CUTOUT HEIGHT (IN/CM) D - MINIMUM VERTICAL GAP BETWEEN CUTOUTS (IN/CM)
C - CHASSIS FACE WIDTH (IN/CM)
D - MOUNTING BRACKET HEIGHT (IN/CM))
E - CHASSIS DEPTH (IN/CM)
MINIMUM CUTOUT DEPTH (IN/CM))
24 / 61.0
F - DRAWER DEPTH (IN/CM)
*Bare minimum spacing for ventilation and to avoid scraping on DWR30U900WS, DWR30U900WM models ** DWR30U900WP : Chassis and drawer face are smaller than cutout; custom front panel mounts to drawer face; height and width of custom front panel must exceed cutout dimensions (A, C above) to cover hole; allow 1/4” minimum added space on top, bottom and sides from the custom front panel edge to prevent scraping against adjacent doors, drawers, and countertop;
G - CHASSIS HEIGHT (IN/CM)
H* - DRAWER FRONT WIDTH (IN/CM)
I* - DRAWER FRONT HEIGHT (IN/CM)
J* - DRAWER FRONT DEPTH (IN/CM)
May Vary. See Manual.
Recommended custom panel dimension based on DWR30U900WS/DA and DWR30U900WM/DA steel door front dimensions. Depth of Custom Panels may vary.
(Recommended Custom Panel Width and Height Only. Custom Panel depth may vary.)
Model numbers, specifications and prices are subject to change at any time without notice. Visit dacor.com for the most up-to-date information. | Effective October 25, 2024
DWR30U900WP 30-Inch Warming Drawer
Made with FlippingBook - professional solution for displaying marketing and sales documents online