m) . must be able to support a single oven weight of 199 lb (90 Kg). must be able to support a double oven weight of 331 lb (150 Kg). T: To avoid damage to your cabinets, check with your builder or plier to make sure that the materials used will not discolor, delaminate ther damage. This oven has been designed in accordance with the ts of UL and CSA International and complies with the maximum ood cabinet temperatures of 194 °F (90 °C). Product dimensions - single ovens ounter installation, it is recommended that the junction box be located ent right or left cabinet. If you are installing the junction box on rear oven, it is recommended that the junction box be recessed and located r Right of the cabinet. 28 7 / 8 ” (731 mm) Given dimensions provide minimum clearance with oven. ecessed installation area must provide complete enclosure around the ecessed portion of the oven. Grounded electrical supply is required. See “Electrical Requirements” ection. cal supply junction box should be located 3” (76 mm) maximum below pport surface when the oven is installed in a wall cabinet. A 1” (26 um diameter hole should have been drilled in the right rear or left orner of the support surface to pass the appliance cable through to the on box. Product Dimensions
30-Inch Single Wall Oven with Steam TRANSITIONAL
28 7 / 8 ” (731 mm)
12 English
mm)
3 1 / 2 ” (89 mm)
29 3 /
4 ” (756 mm)
23 1 /
8 ” (587 mm)
Front view
Sideview
1 3 /
8 ” (33 mm)
47 ” (1200 mm) Conduit length
27 1 / 4 ” (691 mm)
28 (724 mm)
3 1 / 2 ” (89 mm)
29 3 /
4 ” (756 mm)
23 1 /
8 ” (587 mm)
Top view
Front view
Side view
47 ” (1200 mm) Conduit length
Cabinet dimensions - single ovens Installation Cutout Dimensions (Standard)
Installation Cutout Dimensions (Flush)
Flush cabinet dimensions 01 Dimensions provide minimum reveals. (except electrical supply location ‘ Allow a minimum of 22” for clearance to adjacent corners, drawers, walls, etc. when door is open. 02 Allow a minimum of 22” walls, etc. when door is open. 03 Flush installation requires recessed strips (not included) attached to the side of the cabinet opening for mounting the oven. (559 mm) for clearance to adjacent corners, drawers,
E ’)
Standard cabinet dimensions 01 Dimensions provide minimum reveals. (except electrical supply location ‘
E ’)
’)
02 Allow a minimum of 22”
(559 mm) for clearance to adjacent corners, drawers,
walls, etc. when door is open.
68-01308A-00_EN+MES+CFR.indb 6
1 1 /
8 ” (28 mm)
28 (724 mm)
1 1 /
8 ” (28 mm)
28 1 / 2 ” (724 mm)
28 1 / 2 ” (724 mm)
24 7 / 8 ” (630 mm)
23 1 / 2 ” (597 mm)
19 5 / 8 ” (498 mm)
19 8 ” (498 mm) 5 /
1” (26 mm)
1” (26 mm)
m)
Topview
1” (26 mm)
1” (26 mm)
” (33 mm)
1 1 /
2 ” (38 mm)
1 1 /
2 ” (38 mm)
Top view (Cooktop installation)
Top view
Top view
Top view (Cooktop installation)
7 / 8 ” (20 mm) Cleat width
4” (101 mm) For cooktop installation
Max. 9 1 /
2 ” (241 mm)
2 1 /
4 ” (57 mm)
Max. 9 1 /
2 ” (241 mm)
For cooktop installation
27 1 / 4 ” (692 mm)
28 1 / 2 ” (724 mm)
Min. 22” (559 mm)
Min. 22” (559 mm)
30 1 / 4 ” (767 mm)
29” (737 mm)
m)
5” (127 mm)
5” (127 mm)
Side view
Front view
Side view
Front view
Model numbers, specifications and prices are subject to change at any time without notice. Visit dacor.com for the most up-to-date information. | Effective October 25, 2024
English 7
DOB30T977S 30-Inch Single Wall Oven
Install_DOB30P977_DG68-01308A-00_EN+MES+CFR.indb 7
Made with FlippingBook - professional solution for displaying marketing and sales documents online