CASE STUDY 02.
Sustainable Modular System
Brand Challenge Reducing carbon footprint whilst decreasing the cost of a remodel. Collaboration Identify opportunities for reducing, reusing, and recycling products. Result • Modular system of walling and banquette seating which works across multiple markets due to easily adaptable finishes. • Reduced costs due to higher volumes across multiple markets. • Reduced carbon footprint. • Further reduced cost at remodel stage as only worn finishes (e.g. seat pads, infill wall panels) are replaced.
Sustainable Modular Products
We develop lifecycle products with interchangeable parts. Sustainable furniture solutions for evolving hospitality brands. • All elements of a product can be individually recycled, depending on their material • Single elements of a product can be changed to replace worn parts and give a new look and feel • Measure and reduce CO2 emissions • Use of recycled and recyclable materials • Structures can be redeployed (e.g. bench frames)
CASE STUDY 01.
CASE STUDY 03.
Chair Hanger System Brand Challenge Introduction of new signature wooden chair resulted in damages from staff knocking the chairs off tables when cleaning. Collaboration TPC worked with the operational team to understand what a solution could look like. Operations were also looking for time efficiencies when cleaning the store at the end of the day. Result Chair hanger system developed, this eliminated any damages to chairs and increased operational efficiencies when cleaning, as the table tops and floor could be cleaned at the same time.
Banquette Seating Brand Challenge With a quick 1-week site turnaround, contractors didn’t have enough time to measure and manufacture a bespoke fitted banquette unit. Collaboration TPC worked with operation and design teams to solve the problem, by creating a scalable design, fitting every store. Result After extensive research we found that two sizes of banquette seating, 700mm and 800mm, fitted 96% of spaces. For the remaining 4% a “in-fill” kit is used. The modular design can include a pre- cut hole for a power bank. This reduces the QSR’s costs, while simplifying the store design process and reducing the contractor’s time on site. Client saved 350k per year on cheaper unit cost and fitting costs.
Fill-in kit
tpc-global.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online