S80 GLASS/S80 GLASS SC FOR SLIDING INTERIOR DOORS
Installation of upper leading rail and lower guide – Set S80N Glass
4
5
Hanging scheme
Depending on the weight of the door wing, the holders are mounted approx. 500 mm apart
Profile S40/S80N aluminium
Profile S40/S80 steel
min. 145
30
30
30
H
H
Ha
Hs
M8
M8
Ha = H - 70 mm
Use only for tempered glass up to 45 kg A rubber seal (part of the set) must be inserted in the holder
8-10
Mounting the upper rail Slide the runners and brakes into the rail before mounting them Secure the brakes in the required place depending on the location of the upper runner
H Inner diameter = H Aluminium – door high: Hs = H - min. 70 Steel – door hight: Hs = H - min. 66 Glass thickness: 8/10 Ha
6
Ha = H - 70 mm Inspection recommendations
Install the holder to the glass door wing - bolt tightening torque 20 Nm. Perform another 2 tightening checks within 24 hours (the grips may come loose due to the rubber seal being squeezed). Then place the door wing with the holder on the distance screw of the runner, which is located in the leading rail.
8-10
7
Door assembly
Ensuring the correct position of the guide and its assembly in the vertical axis
Hanging doors and securing them
Height adjustment of the door, securing the brakes (activator or Softclose) in the correct position of the door Installation of cover strips
130
Made with FlippingBook - professional solution for displaying marketing and sales documents online