S90 W1/W2 BLACK FOR SLIDING INTERIOR DOORS
4
Hole drilling and mounting of leading bars into the wall
The drilling distance depends on the type of set, see. diagram of bars W1 and W2
3
Secure the stops in the end positions
ø10
5
Installation of Softclose damping
1) Slide the screws onto the Softclose damper and screw them on. Then place the damper (in the closed position) on the leading rail and tighten.
2) Install the safety segments to prevent the door from popping out of the leading rail.
3) Move the door to the end position and mark the place for the actuator.
4) Screw the damper activator to the marked place, tighten the Softclose damper
6
Finishing adjustments
Softclose damper Detail of the damper and activator mounting when viewed from the front
Installation of lower guide Adjust the guide to the centre of the groove, fasten with dowels and screws
Safety segments Installation of safety segments, preventing the door from popping out of the leading rail
www.salu.cz
143
Made with FlippingBook - professional solution for displaying marketing and sales documents online