GOLA PROFILES
Blind plugs
Holders and connectors
Metal holder for Gola profile C, J 10CCDJDUCHK
Blind plug D for Gola profile C 10CNDCZA
Plastic holder for Gola profile C, J 10CCDJDUCH
Blind plug D for Gola profile J 10CNDJZA
Connector for Gola profiles C, J 10CCDJDSP
56,9
Blind plug for Gola profile J 17CPRJDZA
20,6
Cover strip
20
38
Cover strip for vertical Gola profile for oven 40CA2KLT stainless steel
73,5
Blind plug for Gola profile C 17CPRCDZA
20,6
HORIZONTAL GOLA PROFILES
The location of the profile is always from the inside of the door. They are mounted in a laminate, 22 mm from the top edge and 38.5 mm from the side edge. Clip hole - plastic 5 mm, metal 8 mm. The spacing between the holes is 32 mm. Profile fixing: Plastic holder (horizontal) The holder punches directly into the drilled holes. The profile is attached with an "H" - shaped stop.
worktop
Metal holder (horizontal) Plastic dowels (M4) are inserted into the drilled holes, into which the holder is fixed by screws. The profile is attached with a stop with a screw.
worktop
22
25
32
Ventilation holes
drawers
25
38,5
Ventilation holes can be milled into the J-profile to allow air circulation at the hobs (hob manufacturers require hob ventilation to maintain the warranty). Use our configurator for easy ordering.
ø for metal holder – 8 mm ø for plastic holder – 5 mm
182
Made with FlippingBook - professional solution for displaying marketing and sales documents online