S35 FOR SLIDING BUILT-IN DOORS
1
5
Installation of upper and lower runners
2
1
1
1
4
3
3
3
2
2
Installation of upper runner S35A Install screws 2 and 3 before fitting the door Install screw 1 after fitting and adjusting the door
Installation of upper runner S35B Install screws 2 and 3 before fitting the door Install screw 1 after fitting and adjusting the door
Installation of lower runner S35 Install screws 1 and 2 before installing the door Install screws 3 and 4 after fitting and adjusting the door
Installation of the door into a body and subsequent adjustment 6
Runner from the outside of the door
Runner milled in the door
Slide in the door into the lower profile
Pull up the bottom runner and define the door range
Lock the lower and bottom runner in the correct position
Overview and dimensions of frames on page 164–187. USE OF FRAME PROFILES FOR FORGING
Designed for profiles C, D, F1, G, J, K, M and N. S35
C
D
F1
G
J
K
M
N
www.salu.cz
19
Made with FlippingBook - professional solution for displaying marketing and sales documents online