S36/S36SC FOR SLIDING BUILT-IN DOORS
1
2
Assembly of upper and lower runners and the brake
2
4
2
1
3
1 3
Brake assembly The brakes must be slid into the profile before installing the profile in the body
Upper runner assembly Install screws 1 and 2 before installing the door Install screw 3 after fitting and adjusting the door
Lower runner assembly Install screws 1 and 2 before installing the door Install screws 3 and 4 after fitting and adjusting the door
3
Door assembly
Runners from the outside of the door
Runners milled in the door
Place the door on the lower profile Lower the upper runner to the lowest position
Pull up the upper runner and define the door range
Lock the lower and upper runner in the correct position
4
Damper assembly
Damper assembly - see page 170. CAUTION!!! Damper can be used with the type 2 only
Detailed installation instructions are included in the package of each damper
www.salu.cz
23
Made with FlippingBook - professional solution for displaying marketing and sales documents online