LIGHT SHELVES AND LIGHT BOTTOMS
ASSEMBLY INSTRUCTIONS OF LIGHT BOTTOMS
a) screw the light bottom brackets to the walls of the cabinet according to the drawing b) slide the light bottom onto the handles c) secure the bottom from the back by sliding the back from MDF 3 mm d) connect the power supply. current according to the diagram, entrust the connection of the voltage supply to the power supply to an expert according to the instructions for the power supply
55
55
Variant A
side of the cabinet hole ø8 x 11
55
4
standard 296
side of the cabinet
Variant B
a
screw 20 x 3,5
4
standard 296
b
screw 30 x 3,5
Designation example: S-LED mini 564/298 BII. – bottom width 564, depth 296 plus groove on the back of the cabinet, straight front of the bottom, LED strip also in the rear profile of the bottom.
Backlit bottom
d
N L
~220V/50Hz
Assembly instructions can also be found on our website.
Power cable length approx. 1 m
red-black black
Supply 12V
+ -
Online link
ASSEMBLY INSTRUCTIONS OF LIGHT SHELVES
a) Attach the steel bracket of the luminaire to the wall (there must be no power in the electrical connection cable). b) Place the light shelf on a holder firmly attached to the wall. c) Adjust the shelf inclination. d) Secure the shelf with the locking screw. e) LED light source - cannot be replaced (exchange only for a complete luminaire).
c
a
d
b
e
Assembly instructions can also be found on our website.
Online link
15
www.salu.cz
257
Made with FlippingBook - professional solution for displaying marketing and sales documents online