S55A-UN/S55B-UN FOR SLIDING BUILT-IN DOORS
1
4
Installation of upper and lower runners
Mounting the upper runner S55A-UN Insert the runner into the vertical profile and secure with a screw
Mounting the upper runner S55B-UN Insert the runner into the vertical profile and secure with a screw
Lower runner assembly Slide the lower runner into the lower profile and secure with a screw
Brake assembly The brakes are adhesive and only apply when the door is adjusted Degrease the profile before gluing
5
Door assembly
Insert the door into the upper profile Place the lower runner on the lower profile
Insert the door into the upper profile Place the lower runner on the lower profile
Adjust the height of the lower runners with an Allen screw
6
Drilling of the handle profile
sheet metal screw 3,9 x 38
11,5 mm
ø 4,5 mm at lower profile
ø 9 mm
adjusting screw for fitting
41 mm
ø 5,5 mm at lower profile
10,5 mm
ø 9 mm
7
8
Damper assembly
Stop and inter-door brushes
For damper variants, see pages 166–169.
Vertical profiles can be added with stop or inter-door brushes, see page 162.
www.salu.cz
47
Made with FlippingBook - professional solution for displaying marketing and sales documents online