25 S60N-1/ S60N-2 FOR SLIDING BUILT-IN DOORS
1
25
ASSEMBLY INSTRUCTIONS
25
28
ø4
K L
ø4
K L
1
2
Installation of upper and lower leading rails
Milling for lower runners
Depth 5 mm
Lower profile S06 N
Lower profile S06 NN
ø10
ø10
53
53
ø10
ø10
9
1
29
11
55
57
35
35
35
35
12
12
ø35
ø35
25
H = inner diameter
H = inner diameter
17
22,5
25
ø4
CAUTION!!! The upper brakes must be slid into the profile before installing the profile in the body
K L
Caution: When mounting a fixed part of the runner, make sure that the K and L axes are parallel.
ø10
53
17
22,5
3
Installation of upper and lower runners and brakes
ø10
29
11
55
35
35
12
ø35
Upper runner assembly – two-wheeler Fit the runner and screw in 2 screws
Lower runner assembly Attach the fixed part Attach the moving part Adjust the height
Upper runner assembly – unicycle Insert the runner and screw 2 screws into the longitudinal holes of the runner
5
Door assembly
Slide the door into the upper profile, then snap the lower runner into the lower profile
Install the front door in the same way
Adjust the runner pressure to the lower profile
6
7
Damper assembly
Stop and inter-door brushes
Optionally, the system can be supplemented with stop or door brushes, or stop seal. See page 162.
For damper variants, see pages 166–169.
www.salu.cz
55
Made with FlippingBook - professional solution for displaying marketing and sales documents online