S65-1/S65-2 FOR SLIDING BUILT-IN DOORS
1
ASSEMBLY INSTRUCTIONS
1
2
Installation of upper and lower leading rails
Vertical profile drilling
Link to Assembly Video
CAUTION!!! The brakes must be slid into the profile before installing the profile in the body.
Sheet metal screw
ø 4 x 50
ø 9 mm
15 mm
ø 4,5 mm
10,5
10,5
16
16
ø 4,5 mm
H = inner diameter
42 mm
11 mm
ø 5,5 mm
3
Installation of upper and lower runners and brakes
Lower runner assembly Slide the lower runner into the lower profile and secure with a screw Adjust the height with an Allen key
Upper runner assembly Fit the runner and screw 2 screws into the longitudinal holes of the runner
Upper runner assembly Insert the runner into the vertical profile and secure with a screw
4
Door assembly
Place the door on the lower profile Lower the upper runner to the lowest position
Pull up the upper runner and define the door range
Lock the lower and upper ru- nners in the correct position
5
6
Damper assembly
Stop and door brushes
Optionally, the system can be supplemented with stop or door brushes, or stop seal. See page 162.
For damper variants, see pages 166–169.
www.salu.cz
67
Made with FlippingBook - professional solution for displaying marketing and sales documents online