S65-1UN/S65-2UN FOR SLIDING BUILT-IN DOORS
1
ASSEMBLY INSTRUCTIONS
1 Lower profile S06
2
Installation of upper and lower leading rails
Vertical profile drilling
Lower profile S06UPN
Sheet metal screw
ø 4 x 50
ø 9 mm
16
15 mm
ø 4,5 mm
21
42 mm
ø 4,5 mm
24
11 mm
48
ø 5,5 mm
H = inner diameter
H = inner diameter
Profile clip S06UPN
3
Installation of upper and lower runners and brakes
Lower runner assembly Slide the lower runner into the lower profile and secure with a screw Adjust the height with an Allen key
Upper runner assembly Fit the runner and screw 2 screws into the longitudinal holes of the runner
Upper runner assembly Insert the runner into the vertical profile and secure with a screw
4
Door assembly
6
Damper assembly
For damper variants, see pages 166–169.
7
Stop and door brushes
Optionally, the system can be supplemented with a stop system or door brushes, or stop seal. See page 162.
Place the door on the lower profile Lower the upper runner to the lowest position
Pull up the upper and define the door range
Lock the bottom runner in the correct position
www.salu.cz
71
Made with FlippingBook - professional solution for displaying marketing and sales documents online