S45 FOR SLIDING LOADED DOORS
1
ASSEMBLY INSTRUCTIONS
Installation of counter plates, brackets and brakes
1
CAUTION!!! The brakes must be slid into the profile before installing the profile in the body.
Rear door counterplate (number of dampers x2).
Counterplate for front door (number of dampers x2).
Slide the brakes into the upper leading profile, secure them with a worm after adjustment.
Support rail holder - slide into the upper leading profile before mounting the upper leading rail to the body.
2
Installation of upper and lower leading rails
Door height and body side view
Installation of profiles on the cabinet
20
screw 4 x 25
min 20 mm from the ceiling
6
max. 26 mm
40
H = X + 5
50 11
45
min. 20
min. 45!
H = leaf height
Drilling plan for mounting the upper and lower runners
3
4
Assembly of lower and upper runners
64 35
32 32
5
3
2
6
ø 5 x 12
4
1
Screw on the plate with screw 1. Screw in screw 2,3 and tighten only after adjusting with screw 4. Secure screws runner 5, 6. Secure the door against falling out by fitting a plastic part and sliding out the plastic locking element.
44
1
1
3
3
2
2
Screw in and tighten screw 1. Adjust the runner and secure screws 3 and 4.
55
www.salu.cz
85
Made with FlippingBook - professional solution for displaying marketing and sales documents online