Product Warranty
LIMITATIONS AND EXCLUSIONS •
Doors for exterior application use.
• Doors that are improperly installed or adjusted. • Doors that are painted with dark stains or finishes without protection from the elements. • Doors with transparent, high gloss, or opaque finishes. • Natural variations of unsatisfactory results in appearance, color, or, texture resulting from the field application of paint or any other finishing material. • Warp not exceeding 1/4" in the plane of the door itself. Warp should include bow, cup, and twist. Warp not exceeding 3/8" in the plane of the door itself for doors larger than 3070. Warp for 3/8" flat panel door over 3' wide. • Doors that are left unfinished and exposed to the cold, heat, or moisture. • Doors with different face materials or veneer grain configurations on opposite sides of the door. • Cutting doors more than 1" in height and more than a total of 1/4" in width. • Hardware incompatibility with door construction. • Doors where self-tapping or combination metal/wood screws are used to attach surface-applied hardware. • Doors that are machined for concealed vertical rods (CVR) unless installed with metal CVR cap. • Doors that are machined for corner mortised flush bolts unless installed with metal edges or flush bolt cap. • P-LAM doors with openings cut by other than the manufacturer or its authorized representative. 1/4" radius at corners must always be maintained. • Doors that have any form of face grooving which penetrates the crossbanding in excess of limitations set by the factory and doors with face grooving on one face of the door only. • Failure to follow Storage and Handling, Finishing, Maintenance and Installation Instructions. • Damage caused by mishandling, shipping caused breakage, cracking or scratching; normal wear and tear, customer misuse, abuse, neglect or alteration, acts of nature including, but not limited to fires, floods, earthquakes, wind, etc. • This warranty does not cover doors with: • Doors with cutouts for lites and/or louvers, edge is nearer than 5" to any edge of the door. • Doors with cutouts having less than 3 5/16" on non-rated and 20-minute fire rated doors, and less than 5" on 45, 60, and 90-minute fire rated doors between adjacent cutouts for closers, locksets, or any other hardware cutouts on flush doors; and cutouts having less than 1 1/2" on stile and rail doors. Eagle Architectural Door's responsibility under this warranty is as stated herein. There are no other warranties that extend beyond the foregoing. Only the manufacturer has the right to alter this warranty in writing or verbally. The manufacturer shall not be liable for consequential, indirect, or incidental damage, or for the amount in excess of the manufacturer's agreed purchase price for the doors, whether the claim is for negligence or breach of warranty.
28
(833) 921-4600 | www.eagledoorusa.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online