2424A
124
23 3 / 4 x 23 3 / 4 A-Series Mold Bases
See opposite page for general dimensions, ejector stroke data, locating rings, sprue bushings, ejector bar lengths and other ordering information.
L =23.750
L =23.750
11.875 (4)
11.875
10.250
(3)
2.25
10.0625
Z
Z
OFFSET (1)
OFFSET (1)
5/16-18 FLAT HEAD SCREW (2)
10.250
7.750
(4)
11.000
11.125
(4)
(3)
R 1.656
W =23.750
8.875
10.8437 (8)
(4)
(8) 10.8437
11.875
2.750
2.750
VIEW Y-Y
VIEW X-X
(4)
(4)
3.750
7.750
All dimensions are “Nominal” unless a tolerance is specified.
(4)
(4)
1.500 I.D. x 2.000 O.D. SHOULDER BUSHING (4) 1.500 DIA. GUIDE PIN (4) 5/8-11 S.H.C.S. (8)
7.750
(4)
W =23.750
11.250
(4)
11.875
D DIA.
DIA. C-BORE
DME STD SPRUE BUSHING Specify O & R Dimensions DME STD LOCATING RING Specify Item Number
2.000 DIA. 4.000
O DIA. R
.62
.531
.219
.875
CP =1.375 A
± .001
.25 x 45°
Y
.81
Y
± .001
.25
1.000 DIA.
B
.19
X
X
H
.750 DIA. RETURN PIN (4)
± .001
1/2-13 S.H.C.S. (4)
SU =2.375
.375 DIA. SPRUE PULLER PIN
.25
ER =.625
S
± .001
C
± .001 1.3125
(Ejector Housing Cover shown removed for visibility of Ejector Assembly.)
EB =1.125
.81
BCP =1.375
1.375
END VIEW
.875 O.D. TUBULAR DOWEL (2) (DIAGONALLY OPPOSITE) 5/8-11 S.H.C.S. (8) E SECTION Z-Z
.625 DIA. STOP PIN (8)
.62
7.750 Ref.
NO. 1 STEEL NO. 1 STEEL 8.875 Ref.
NO. 2 STEEL NO. 2 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
To reinforce Support Plate, use Support Pillars.
19.875
1.875 Ref.
10.000
9.9375
.06 Ref.
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
20.000
TOP CLAMPING PLATE Mold Base Selections A-Series Assembly
Steel Configurations available in:
No. 1 Steel Assembly
No. 2 Steel Assembly
No. 3 Steel Assembly
No. 7 Steel Assembly
B-Series Assembly
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
Other steel combinations also available. (Ejector Plates and Housings are No. 1 Steel, unless otherwise specified.) For additional Steel information, see page 42.
(For X-Series Stripper Plate, AX-Series and T-Series Mold Bases, see pages 173-198.)
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
Made with FlippingBook - professional solution for displaying marketing and sales documents online