X-, AX- andT-Series Mold Bases
125
AX- and T-Series Mold Base Features
AX-Series Mold Bases A DME Standard AX-Series Mold Base is basically an A-Series type mold base with a floating plate (X-1-plate) added between the cavity plates. This type assembly is used when it is desirable to have the floating plate remain with the upper half of the assembly.
AX-SERIES
TOP CLAMPING PLATE
A-PLATE
X-1-PLATE
B-PLATE
SUPPORT PLATE
EJECTOR RETAINER PLATE EJECTOR PLATE
EJECTOR HOUSING
T-Series Mold Bases DME Standard T-Series Mold Bases are available in 42 standard sizes, from 7.875 × 7.875 to 23.75 × 35.5. They are used for top runner molds that require two floating plates (X-1 – runner stripper plate, X-2 – cavity plate) to remain with the upper or stationary half of the assembly.
“T” SERIES
A-CLAMPING PLATE
X-1-PLATE
X-2-PLATE
B-PLATE SUPPORT PLATE
EJECTOR RETAINER PLATE EJECTOR PLATE
EJECTOR HOUSING
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online