Standard & Optional Mold Base Features
154
Guided Ejection Systems
S
Guided Ejection Systems hold the ejector assembly in alignment and support the weight of the ejector assembly throughout the molding cycle – greatly reducing wear on ejection components and preventing cocking of the ejector assembly.
5
FOR QUOTING OR ORDERING, SPECIFY:
SYSTEM 1 When pins are installed in the support plate, the ejector housing can be removed from the mold without removing ejector plates. This permits easy access to service the ejector system.
SYSTEM 2 Pins installed in the ejector housing permit fast installation. When the ejector housing is removed from the mold base, the complete ejector assembly is removed.
Guided Ejection System Type
System 1 System 2 Quantity (2 or 4): _________ Guided Ejection Bushing Type Bronze-Plated Steel Bushings Self-Lubricating Bushings
Leader Pin
Leader Pin
Leader Pin
Leader Pin
Guided Ejection Position: STD Specify
Ejector Housing
Ejector Plate
Ejector Retainer Plate
Support Plate
Ejector Housing
Ejector Plate
Ejector Retainer Plate
Support Plate
Ejector Housing
Ejector Plate
Ejector Retainer Plate
Support Plate
Ejector Housing
Ejector Plate
Ejector Retainer Plate
Support Plate
SYSTEM 1
SYSTEM 2
SYSTEM 1
SYSTEM 2
Recommended position from table provided standard (see opposite page). If a different position is required, specify below.
GEx____________ GEy____________
Diameter: STD Specify
Recommended diameter from table provided standard. If a different diameter is required, it will require a positioning change; specify below. Available diameters:
0.750 0.875 1.000 1.250
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online