Standard & Optional Mold Base Features
Z
160
Leader Pin Vents, Spring Pockets & Mold Strap Holes
S
OFFSET (1)
5
FOR QUOTING OR ORDERING, SPECIFY:
Y Leader Pin Vents, which allow trapped air to escape from the mold, are designed into all 15-inch-and-wider series molds.
Clamp plate
A-plate
Leader Pin Vents Leader Pin Vents (0.50 wide x 0.12 deep) can be machined in the housing under the bushing location.
B-plate
When desired, they can be specified on smaller molds.
X
(4) PLACES CENTERED ON EACH SHOULDER BUSHING, INCLUDING THE OFFSET BUSHING - IN TOP OF RISERS ON EJECTOR HOUSING FOR LEADER PIN VENT SLOTS .50 WIDE X .12 DEEP
Support plate
LPV-X (3) PLACES
LPV-XOS (1) PLACE
Housing
VIEW X-X ("B" HALF OF MOLD)
SECTION Z-Z
W
Spring Pockets Quantity: __________________ Plate(s) with pockets: _________
Per customer specifications, any type of cavity and core pockets can be finished. See DME Mold Components catalog for spring free lengths and hole dimensions.
ROD
HOLE
FREE LENGTH
Mold Strap Holes Provide desired positions and quantity (minimum 2). Quantity: __________________ Positions: __________________
Machined holes will be for mounting mold straps. Please provide desired positions and quantity (minimum 2).
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online