Standard & Optional Mold Base Features
Leader Pin Vents, Spring Pockets & Mold Strap Holes
FOR QUOTING OR ORDERING, SPECIFY:
Y Leader Pin Vents, which allow trapped air to escape from the mold, are designed into all 15-inch-and-wider series molds.
Leader Pin Vents Leader Pin Vents (0.50 wide x 0.12 deep) can be machined in the housing under the bushing location.
When desired, they can be specified on smaller molds.
(4) PLACES CENTERED ON EACH SHOULDER BUSHING, INCLUDING THE OFFSET BUSHING - IN TOP OF RISERS ON EJECTOR HOUSING FOR LEADER PIN VENT SLOTS .50 WIDE X .12 DEEP
LPV-X (3) PLACES
LPV-XOS (1) PLACE
VIEW X-X ("B" HALF OF MOLD)
Spring Pockets Quantity: __________________ Plate(s) with pockets: _________
Per customer specifications, any type of cavity and core pockets can be finished. See DME Mold Components catalog for spring free lengths and hole dimensions.
Mold Strap Holes Provide desired positions and quantity (minimum 2). Quantity: __________________ Positions: __________________
Machined holes will be for mounting mold straps. Please provide desired positions and quantity (minimum 2).
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online