X-, AX- and T-Series Mold Bases
167
AX- and T-Series Mold Base Features
“AX” Series Mold Bases A DME Standard “AX” Series Mold Base is basically an “A” Series type mold base with a floating plate (“X-1” plate) added between the cavity plates. This type assembly is used when it is desirable to have the floating plate remain with the upper half of the assembly.
“AX” SERIES
TOP CLAMPING PLATE “A” PLATE
“X-1” PLATE
“B” PLATE
SUPPORT PLATE
EJECTOR HOUSING
“T” Series Mold Bases DME Standard “T” Series Mold Bases are available in 42 standard sizes, from 7.875 × 7.875 to 23.75 × 35.5. They are used for top runner molds that require two floating plates (“X-1” – runner stripper plate, “X-2” – cavity plate) to remain with the upper or stationary half of the assembly.
“T” SERIES
“A”CLAMPING PLATE “X-1” PLATE
“X-2” PLATE
“B” PLATE SUPPORT PLATE
EJECTOR HOUSING
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online