DME XPress PLUS Mold Bases
23
DME XPress PLUS Mold Bases
TO ORDER AN XPRESS PLUS MOLD BASE: Go to the DME eStore: www.dme.net/configurator, select the XPress mold base series you require. Proceed with following 7 steps: CONFIGURE YOUR MOLD BASE STACK-UP SPRUE BUSHING “O” SPRUE BUSHING “R” LOCATING RING
1 2
3
4
1
XP
A
1012
-17
-17
-35
-GE
-3
A/B PLATE MATERIAL 3 P20
SIZE (W” X L”)
BASE
AP THICKNESS 7* 0.875” 13* 1.375” 17 1.875” 23 2.375” 27 2.875” 33 3.375” 37 3.875” 47 4.875” 57 5.875” 7NCH* 0.875” 13NCH* 1.375” 17NHC 1.875” 23NHC 2.375” 27NHC 2.875” 33NHC 3.375” 37NHC 3.875” 47NHC 4.875” 57NHC 5.875”
BP THICKNESS 7 0.875” 13 1.375” 17 1.875” 23 2.375” 27 2.875” 33 3.375” 37 3.875” 47 4.875” 57 5.875”
RAIL HEIGHT 25† 2.50” 30 3.00” 35 3.50” 40 4.00” 45 4.50”
EJECTION
FAMILY
SERIES
Guided Ejection No Guided Ejection
0808 7.875 x 7.875 0812 7.875 x 11.875 1008 9.875 x 8 1012 9.875 x 11.875 1016 9.875 x 16 1112 10.875 x 12 1114 10.875 x 14 1118 10.875 x 18 1212 11.875 x 12 1215 11.875 x 15 1220 11.875 x 20 1315 13.375 X 15 1318 13.375 X 18 1321 13.375 X 20.75 1518 14.875 x 17.875 1524 14.875 x 23.75 1616 15.875 x 16 1620 15.875 x 20 1623 15.875 x 23.5 1818 17.875 x 18 1820 17.875 x 20 1823 17.875 x 23.5 1924 19.5 x 23.75
XP XP
A A Series B B Series
GE
NG
L - 6501 4
3
LOCATIONG RING DESCRIPTION L 6501 3.99 ø Standard 6521 3.99 ø Standard, Extra Length 6504 3.99 ø Clamp Type Omit
R - 1/2”
2
SPRUE RADIUS R 1/2” 3/4” Omit
0 - 7/32”
SPRUE ORIFICE 0
5/32” 7/32” 9/32” 11/32” Omit
– A & B-Series plates with no additional letters include center hole in the TCP & AP, or AC plates. – NCH = No center hole in the TCP and the AP plate for the A-Series or the AC plate for B-Series * 7/8” and 1 3/8” available only in the A-Series † = 2.5” Rails only available in base sizes 0808 to 1118
5 DOWNLOAD CAD
ADD ANY/ALL PLUS FEATURES TO DOWNLOADED CAD (only add to, do not alter downloaded CAD) 6
ADD XPRESS PLUS SERVICES • Support Pillars
• Rough or Finished Pockets • Lock Pockets • Slide Pockets • Rough Bore – Blind/Through • Side & Parting Line Interlocks • Knock Out Holes • Stripper Bolt Holes • Safety Strap Holes • Additional Lift Holes • Pipe Clearance Slots • Shot Counter Pocketing
• Secondary Leader Pins – Manifold Alignment • Reversed Leader Pins – Manifold Alignment • Additional Stop Disks – (drill/tapped holes) • Additional Assembly Screws • Additional Return Pins • Additional Pry bar Slots • Waterlines – including Counterbores & Taps • Ejector Pin Holes • Spring Holes (std. dia. only) Return Pin Loc. • Rectangular Insert Pockets – Blind/Through (minimum 0.375” corner radius )
7 SEND UPDATED CAD FILES TO DME FOR QUOTATION
• CAD data in: Solidworks ™ Parasolids, Creo Parasolids and Step • Return to DME ( dme_cad@dme.net ): Updated 3D model with additional features required • 2D-drawings with tolerances DME is able to work paperless only from 3D-models, 2D-Data is required for tolerance info.
Click here for standard XPress Return Pin and Stop Disc locations
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ dme.net ■ store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online