1012A
50
9 7 / 8 x 11 7 / 8 A-Series Mold Bases
See opposite page for general dimensions, ejector stroke data, locating rings, sprue bushings, ejector bar lengths and other ordering information.
L =11.875
L =11.875
5.9375
5.9375
5.0625
(3)
4.875
1.31
(4)
Z
OFFSET (1)
Z
OFFSET (1)
4.0625 (4)
5/16-18 FLAT HEAD SCREW (2)
5.1875
2.250
5.3125
R 1.656
(3)
(4)
W =9.875
4.000
3.0625
(4)
(4)
4.000
(4)
4.9375
VIEW Y-Y
VIEW X-X
3.250
3.250
(4) 5.3125
(4)
(4)
All dimensions are “Nominal” unless a tolerance is specified.
.875 I.D. x 1.250 O.D. SHOULDER BUSHING (4) .875 DIA. GUIDE PIN (4) 1/2-13 S.H.C.S. (4)
W =9.875
D DIA.
4.9375
DME STD SPRUE BUSHING Specify O & R Dimensions DME STD LOCATING RING Specify Item Number
DIA. C-BORE
2.000 DIA. 4.000
.62
O DIA. R
.531
.219
CP =.875
.81
Y
A ± .001 B ± .001
Y
.25 x 45°
.25
1.000 DIA.
X
.19
X
.625 DIA. RETURN PIN (4)
5/16-18 S.H.C.S. (4)
SU =1.875 ± .001
.375 DIA. SPRUE PULLER PIN
S
ER =.500
.25
C ± .001
H
± .001
(Ejector Housing Cover shown removed for visibility of Ejector Assembly.)
EB =1.000
.81
1.1875
.875
BCP =.875
END VIEW
.750 O.D. TUBULAR DOWEL (2) (DIAGONALLY OPPOSITE) 1/2-13 S.H.C.S. (4) E SECTION Z-Z
.62
.625 DIA. STOP PIN (6)
2.250 Ref.
3.0625 Ref.
6.875
To reinforce Support Plate, use Support Pillars.
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 2 STEEL NO. 2 STEEL 1.4375 Ref. NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
3.500
3.4375
.06 Ref.
7.000
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 1 STEEL NO. 1 STEEL
TOP CLAMPING PLATE Mold Base Selections A-Series Assembly
Steel Configurations available in:
No. 1 Steel Assembly
No. 2 Steel Assembly
No. 3 Steel Assembly
No. 7 Steel Assembly
B-Series Assembly
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
Other steel combinations also available. (Ejector Plates and Housings are No. 1 Steel, unless otherwise specified.) For additional Steel information, see page 42.
(For X-Series Stripper Plate, AX-Series and T-Series Mold Bases, see pages 173-198.)
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
Made with FlippingBook - professional solution for displaying marketing and sales documents online