1118A
60
10 7 / 8 x 18" A-Series Mold Bases
See opposite page for general dimensions, ejector stroke data, locating rings, sprue bushings, ejector bar lengths and other ordering information.
L =18.000
L =18.000
9.000
9.000
8.125
(3)
7.9375
1.62
(4)
Z
OFFSET (1)
Z
OFFSET (1)
4.5625 (4)
5/16-18 FLAT HEAD SCREW (2)
8.250
2.8125 (4)
8.375
R 1.656
(3)
W =10.875
4.4687
3.3125
(6)
(4)
4.4687
(6)
5.4375
1.000
5.875
VIEW Y-Y
VIEW X-X
1.000
5.875
(2)
(4)
(4) 7.5625
(2)
(4)
All dimensions are “Nominal” unless a tolerance is specified.
.875 I.D. x 1.250 O.D. SHOULDER BUSHING (4) .875 DIA. GUIDE PIN (4) 1/2-13 S.H.C.S. (6)
W =10.875
D DIA.
5.4375
DME STD SPRUE BUSHING Specify O & R Dimensions DME STD LOCATING RING Specify Item Number
DIA. C-BORE
2.000 DIA. 4.000
.62
O DIA. R
.531
.219
CP =.875
.81
Y
A ± .001 B ± .001
Y
.25 x 45°
.25
1.000 DIA.
X
.19
X
.625 DIA. RETURN PIN (4)
5/16-18 S.H.C.S. (4)
SU =1.875 ± .001
.375 DIA. SPRUE PULLER PIN
S
ER =.500
.25
H
C ± .001
± .001
(Ejector Housing Cover shown removed for visibility of Ejector Assembly.)
EB =1.000
.81
1.1875
BCP =.875
.875
END VIEW
.750 O.D. TUBULAR DOWEL (2) (DIAGONALLY OPPOSITE) 1/2-13 S.H.C.S. (6) E SECTION Z-Z
.62
.625 DIA. STOP PIN (6)
2.8125 Ref.
3.3125 Ref.
To reinforce Support Plate, use Support Pillars.
7.375
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 2 STEEL NO. 2 STEEL 1.6875 Ref. NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
3.750
3.6875
.06 Ref.
7.500
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 1 STEEL NO. 1 STEEL
TOP CLAMPING PLATE Mold Base Selections A-Series Assembly
Steel Configurations available in:
No. 1 Steel Assembly
No. 2 Steel Assembly
No. 3 Steel Assembly
No. 7 Steel Assembly
B-Series Assembly
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
Other steel combinations also available. (Ejector Plates and Housings are No. 1 Steel, unless otherwise specified.) For additional Steel information, see page 42.
(For X-Series Stripper Plate, AX-Series and T-Series Mold Bases, see pages 173-198.)
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
Made with FlippingBook - professional solution for displaying marketing and sales documents online