1212A
64
11 7 / 8 x 12" A-Series Mold Bases
See opposite page for general dimensions, ejector stroke data, locating rings, sprue bushings, ejector bar lengths and other ordering information.
L =12.000
L =12.000
6.000
4.8125
6.000
(3)
4.625
1.62
(4)
Z
Z
OFFSET (1)
OFFSET (1)
5/16-18 FLAT HEAD SCREW
5.000
(2)
(4)
3.1875 (4)
5.250
5.375
R 1.656
(3)
W =11.875
3.8125
4.9687
(4)
4.9687
(4)
5.9375
(4)
VIEW Y-Y
VIEW X-X
2.8125
2.8125
(4) 4.500
(4)
1.000 I.D. x 1.375 O.D. SHOULDER BUSHING (4) 1.000 DIA. GUIDE PIN (4) 1/2-13 S.H.C.S. (4)
All dimensions are “Nominal” unless a tolerance is specified.
(4)
W =11.875
D DIA.
5.9375
DME STD SPRUE BUSHING Specify O & R Dimensions DME STD LOCATING RING Specify Item Number
DIA. C-BORE
2.000 DIA. 4.000
O DIA. R
.62
.531
.219
CP =.875
.81
± .001
Y
Y
A
.25 x 45°
± .001
.25
1.000 DIA.
B
.19
X
X
H
.750 DIA. RETURN PIN (4)
± .001
SU =1.875
5/16-18 S.H.C.S. (4)
.375 DIA. SPRUE PULLER PIN
.25
ER =.500
S
± .001
C
± .001
(Ejector Housing Cover shown removed for visibility of Ejector Assembly.)
EB =1.125
1.3125
.81
BCP =.875
.875
END VIEW
.750 O.D. TUBULAR DOWEL (2) (DIAGONALLY OPPOSITE) 1/2-13 S.H.C.S. (4) E SECTION Z-Z
.625 DIA. STOP PIN (6)
3.1875 Ref.
3.8125 Ref.
.62
To reinforce Support Plate, use Support Pillars.
NO. 1 STEEL NO. 1 STEEL 8.375
NO. 2 STEEL NO. 2 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
1.6875 Ref.
4.250
4.1875
.06 Ref.
NO. 1 STEEL NO. 1 STEEL 8.500
NO. 2 STEEL NO. 2 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
TOP CLAMPING PLATE Mold Base Selections A-Series Assembly
Steel Configurations available in:
No. 1 Steel Assembly
No. 2 Steel Assembly
No. 3 Steel Assembly
No. 7 Steel Assembly
B-Series Assembly
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
Other steel combinations also available. (Ejector Plates and Housings are No. 1 Steel, unless otherwise specified.) For additional Steel information, see page 42.
(For X-Series Stripper Plate, AX-Series and T-Series Mold Bases, see pages 173-198.)
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
Made with FlippingBook - professional solution for displaying marketing and sales documents online