1329A
82
13 3 / 8 x 29 1 / 2 A-Series Mold Bases
See opposite page for general dimensions, ejector stroke data, locating rings, sprue bushings, ejector bar lengths and other ordering information.
L =29.500
L =29.500
14.750
14.750
13.3125 (3)
13.125
2.19
(4)
Z
Z
OFFSET (1)
OFFSET (1)
5.6875
5/16-18 FLAT HEAD SCREW (2)
(4)
R 1.656
3.8125 (4)
13.875
14.000
(3)
W =13.375
5.7187 (8)
4.250
(8) 5.7187
(4)
6.6875
3.250
3.250
VIEW Y-Y
VIEW X-X
(4)
5.000
(4)
(4) 11.125
(4)
11.125
(4)
13.0625 (4)
1.000 I.D. x 1.375 O.D. SHOULDER BUSHING (4) 1.000 DIA. GUIDE PIN (4)
All dimensions are “Nominal” unless a tolerance is specified.
W =13.375
D DIA.
6.6875
DME STD SPRUE BUSHING Specify O & R Dimensions DME STD LOCATING RING Specify Item Number
DIA. C-BORE
.62
2.000 DIA. 4.000
O DIA. R
1/2-13 S.H.C.S. (8)
.531
.219
.875
CP =1.375
.25 x 45°
.81
Y
A ± .001 B ± .001
Y
.25
1.000 DIA.
X
.19
X
.750 DIA. RETURN PIN (4)
SU =1.875 ± .001
3/8-16 S.H.C.S. (4)
.375 DIA. SPRUE PULLER PIN
ER =.625
.25
S
H
C ± .001
± .001
EB =1.125
(Ejector Housing Cover shown removed for visibility of Ejector Assembly.)
1.3125
.81
.875
BCP =.875
SECTION Z-Z
END VIEW
.625 DIA. STOP PIN (8)
3.8125 Ref.
4.250 Ref.
.62
.750 O.D. TUBULAR DOWEL (2) (DIAGONALLY OPPOSITE) 1/2-13 S.H.C.S. (8) E
9.500
To reinforce Support Plate, use Support Pillars.
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
1.875 Ref.
4.8125
4.750
.06 Ref.
9.625
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
TOP CLAMPING PLATE Mold Base Selections A-Series Assembly
Steel Configurations available in:
No. 1 Steel Assembly
No. 2 Steel Assembly
No. 3 Steel Assembly
No. 7 Steel Assembly
B-Series Assembly
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
Other steel combinations also available. (Ejector Plates and Housings are No. 1 Steel, unless otherwise specified.) For additional Steel information, see page 42.
(For X-Series Stripper Plate, AX-Series and T-Series Mold Bases, see pages 173-198.)
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
Made with FlippingBook - professional solution for displaying marketing and sales documents online