1518A
84
14 7 / 8 x 17 7 / 8 A-Series Mold Bases
See opposite page for general dimensions, ejector stroke data, locating rings, sprue bushings, ejector bar lengths and other ordering information.
L =17.875
L =17.875
8.9375
8.9375
7.5625
(3)
7.375
2.31
(4)
Z
OFFSET (1)
Z
OFFSET (1)
6.0625 (4)
5/16-18 FLAT HEAD SCREW (2)
8.125
3.875
8.250
R 1.656
(3)
(4)
W =14.875
6.4687
5.000
(6)
(4)
6.4687
(6)
7.4375
1.000
(4) 5.4375
VIEW Y-Y
VIEW X-X
(2)
1.000
2.750
(2)
(4)
5.4375 (4)
All dimensions are “Nominal” unless a tolerance is specified.
1.250 I.D. x 1.625 O.D. SHOULDER BUSHING (4) 1.250 DIA. GUIDE PIN (4) 1/2-13 S.H.C.S. (6)
8.3125 (4)
W =14.875
7.4375
D DIA.
DIA. C-BORE
DME STD SPRUE BUSHING Specify O & R Dimensions DME STD LOCATING RING Specify Item Number
2.000 DIA. 4.000
O DIA. R
.62
.531
.219
.875
CP =1.375
.25 x 45°
.81
A ± .001 B ± .001
Y
Y
1.000 DIA.
.25
.19
X
X
.750 DIA. RETURN PIN (4)
SU =2.375 ± .001
3/8-16 S.H.C.S. (4)
.375 DIA. SPRUE PULLER PIN
ER =.625
.25
S
H
C ± .001
± .001
(Ejector Housing Cover shown removed for visibility of Ejector Assembly.)
EB =1.125
1.3125
.81
BCP =.875
.875
END VIEW
.750 O.D. TUBULAR DOWEL (2) (DIAGONALLY OPPOSITE) 1/2-13 S.H.C.S. (6) E SECTION Z-Z
.625 DIA. STOP PIN (8)
3.875 Ref .
5.000 Ref.
.62
11.000
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
To reinforce Support Plate, use Support Pillars.
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
1.875 Ref.
5.5625
5.500
.06 Ref.
11.125
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
TOP CLAMPING PLATE Mold Base Selections A-Series Assembly
Steel Configurations available in:
No. 1 Steel Assembly
No. 2 Steel Assembly
No. 3 Steel Assembly
No. 7 Steel Assembly
B-Series Assembly
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
Other steel combinations also available. (Ejector Plates and Housings are No. 1 Steel, unless otherwise specified.) For additional Steel information, see page 42.
(For X-Series Stripper Plate, AX-Series and T-Series Mold Bases, see pages 173-198.)
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
Made with FlippingBook - professional solution for displaying marketing and sales documents online