1626A
96
15 7 / 8 x 26" A-Series Mold Bases
See opposite page for general dimensions, ejector stroke data, locating rings, sprue bushings, ejector bar lengths and other ordering information.
L =26.000
L =26.000
13.000
13.000
11.5625 (3)
11.375
1.62
(4)
Z
OFFSET (1)
Z
OFFSET (1)
6.5625
(4)
5/16-18 FLAT HEAD SCREW (2)
12.125
4.375
12.250
R 1.656
(3)
(4)
W =15.875
6.9687
5.4375
(8)
(4)
6.9687
(8)
7.9375
3.125
3.125
VIEW Y-Y
VIEW X-X
(4)
(4)
4.000
9.250
(4)
(4)
9.250
(4)
1.250 I.D. x 1.625 O.D. SHOULDER BUSHING (4) 1.250 DIA. GUIDE PIN (4) 1/2-13 S.H.C.S. (8)
All dimensions are “Nominal” unless a tolerance is specified.
12.375
W =15.875
(4)
7.9375
D DIA.
DIA. C-BORE
DME STD SPRUE BUSHING Specify O & R Dimensions DME STD LOCATING RING Specify Item Number
2.000 DIA. 4.000
O DIA. R
.62
.531
.219
.875
CP =1.375
.25 x 45°
.81
A ± .001 B ± .001
Y
Y
1.000 DIA.
.25
.19
X
X
.750 DIA. RETURN PIN (4)
SU =2.375 ± .001
3/8-16 S.H.C.S. (4)
.375 DIA. SPRUE PULLER PIN
ER =.625
.25
S
H
C ± .001
± .001 1.3125
(Ejector Housing Cover shown removed for visibility of Ejector Assembly.)
EB =1.125
.81
BCP =.875
.875
END VIEW
.750 O.D. TUBULAR DOWEL (2) (DIAGONALLY OPPOSITE) 1/2-13 S.H.C.S. (8) E SECTION Z-Z
.625 DIA. STOP PIN (8)
4.375 Ref.
5.4375 Ref.
.62
12.000
To reinforce Support Plate, use Support Pillars.
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
1.875 Ref.
6.0625
6.000
.06 Ref.
12.125
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL
TOP CLAMPING PLATE Mold Base Selections A-Series Assembly
Steel Configurations available in:
No. 1 Steel Assembly
No. 2 Steel Assembly
No. 3 Steel Assembly
No. 7 Steel Assembly
B-Series Assembly
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL NO. 2 STEEL
NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL NO. 1 STEEL
NO. 7 STEEL NO. 7 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL
Other steel combinations also available. (Ejector Plates and Housings are No. 1 Steel, unless otherwise specified.) For additional Steel information, see page 42.
(For X-Series Stripper Plate, AX-Series and T-Series Mold Bases, see pages 173-198.)
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
U.S. 800-626-6653 ■ Canada 800-387-6600 ■ sales@dme.net ■ www.dme.net
NO. 2 STEEL NO. 3 STEEL NO. 2 STEEL NO. 3 STEEL
NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL NO. 7 STEEL
Made with FlippingBook - professional solution for displaying marketing and sales documents online