Simplicity ® Linear Slides
Slide Selection Information
e. Location and magnitude of any force which resists the motion of the slide f. Acceleration rate and maximum velocity of the saddle g. Deceleration rate h. Service life requirements i. Type of environment the slide will operate in
1. Determine the size and stroke of slide 2. Is a lube system required? 3. Please furnish the following to the factory: a. Model designation b. Lube system requirements c. Mounting orientation, saddle position if mounted at an angle d. Load to be carried and approximate center of gravity from saddle center
Model Number
–
–
–
Series Code
Size Code
Length Code
Ball Screw Lead Code
Mounting Orientation Please indicate the parameters of your application in the boxes below:
Angle
Angle
Angle Saddle Up
Angle Saddle Down
Horiz.
Vert.
Horiz.
Horiz.
Cycle Rate: MAX Saddle Velocity: Acceleration Rate: Deceleration Rate: Load:
Per Hour: Inch/Second:
Per Minute:
Inches/Second 2 : Inches/Second 2 : lbs.
Location of Center of Gravity from Saddle Center Please indicate the parameters of your application in the boxes below:
C.G.
Resisting
Force (If Present)
Drive Slide
Note: Example of “Resisting Force” would be tool thrust for a drill head mounted on slide.
Resisting Force: Life Requirement:
lbs. Strokes:
Hours
132 Round Shaft Technology • pbclinear.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online