Simplicity ® Sleeve Bearings
Sleeve Bearings PS
L
B A
Frelon ® Liner
Aluminum Alloy (No Coating)
DIMENSIONAL INFORMATION
MAX. Static Load lb.
Recommended Housing Bore
L
Nominal Bearing Size
A Bearing I.D.
B O.D.
Bearing Weight
Slip Fit & Epoxy
Press Fit
Length
Frelon ®
Part No.
I.D.
O.D.
Length MIN MAX MIN MAX MIN MA.
GOLD J & W OZ.
MIN
MAX
MIN
MAX
PS0305-02 3/16" 5/16" PS0305-04 3/16" 5/16"
1/4" 1/2" 1/4" 3/8" 1/2" 1/2" 3/4" 3/4" 1/2" 3/4"
0.1890 0.1900 0.3135 0.3145 0.230 0.250 130 65
0.02
0.3145 0.3155 0.3125 0.3130 0.3145 0.3155 0.3125 0.3130 0.3770 0.3780 0.3750 0.3755 0.3770 0.3780 0.3750 0.3755 0.3770 0.3780 0.3750 0.3755 0.6270 0.6280 0.6250 0.6255 0.6270 0.6280 0.6250 0.6255 0.6270 0.6280 0.6250 0.6255 0.7520 0.7530 0.7500 0.7505 0.7520 0.7530 0.7500 0.7505 0.7520 0.7530 0.7500 0.7505 0.8770 0.8780 0.8750 0.8755 0.8770 0.8780 0.8750 0.8755 1.0020 1.0030 0.9995 1.0000 1.0020 1.0030 0.9995 1.0000 1.2520 1.2530 1.2490 1.2500 1.5020 1.5030 1.4990 1.5000 1.7520 1.7530 1.7490 1.7500 2.0020 2.0030 1.9990 2.0000 2.2520 2.2530 2.2490 2.2500 2.7520 2.7530 2.7490 2.7500 3.2520 3.2530 3.2485 3.2495
0.1890 0.1900 0.3135 0.3145 0.480 0.500 272 136 0.04
PS0406-02 1/4" PS0406-03 1/4" PS0406-04 1/4" PS0610-04 3/8" PS0610-06 3/8" PS0710-06 7/16" PS0812-04 1/2" PS0812-06 1/2" PS0812-08 1/2" PS1014-06 5/8" PS1014-08 5/8" PS1216-08 3/4" PS1216-10 3/4" PS1620-12 1"
3/8" 3/8" 3/8" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 7/8" 7/8"
0.2515 0.2525 0.3760 0.3770 0.230 0.250 174 87
0.03
0.2515 0.2525 0.3760 0.3770 0.355 0.375 268 134 0.04 0.2515 0.2525 0.3760 0.3770 0.480 0.500 362 181 0.05 0.3765 0.3775 0.6260 0.6270 0.480 0.500 542 271 0.14 0.3765 0.3775 0.6260 0.6270 0.730 0.750 824 412 0.20 0.4390 0.4400 0.6260 0.6270 0.730 0.750 962 481 0.23 0.5015 0.5025 0.7510 0.7520 0.480 0.500 722 361 0.15 0.5015 0.5025 0.7510 0.7520 0.730 0.750 1098 549 0.25
1" 0.5015 0.5025 0.7510 0.7520 0.980 1.000 1474 737 0.35
3/4"
0.6265 0.6275 0.8760 0.8770 0.730 0.750 1372 686 0.30
1" 0.6265 0.6275 0.8760 0.8770 0.980 1.000 1842 921 0.45 1" 0.7515 0.7525 1.0010 1.0020 0.980 1.000 2210 1105 0.50
1"
1" 1.25" 0.7515 0.7525 1.0010 1.0020 1.230 1.250 2777 1389 0.65 1-1/4" 1-1/2" 1.0015 1.0025 1.2510 1.2520 1.480 1.500 4446 2223 0.95
PS2024-16 1-1/4" 1-1/2" PS2428-16 1-1/2" 1-3/4"
2" 1.2515 1.2525 1.5010 1.5020 1.980 2.000 7434 3717 1.55 2" 1.5015 1.5025 1.7510 1.7520 1.980 2.000 8918 4459 1.80 3" 1.7515 1.7525 2.0010 2.0020 2.980 3.000 15658 7829 3.15 3" 2.0015 2.0025 2.2510 2.2520 2.980 3.000 17894 8947 3.55 3" 2.5015 2.5025 2.7510 2.7520 2.980 3.000 22364 11182 4.85
PS2832-24 1-3/4" PS3236-24 2"
2"
2-1/4"
PS4044-24 2-1/2" 2-3/4"
PS4852-28 3"
3-1/4" 3-1/2" 3.0015 3.0025 3.2510 3.2520 3.480 3.500 31336 15668 6.10
INSTALLATION INSTRUCTIONS 1. Slip the bearing sleeve into the housing and epoxy into place with Loctite ® or similar type bonding agent.
ORDERING INFORMATION
PS
12
16
-
08
Type
I.D.
O.D.
Length
Do NOT let any of the adhesive touch the bearing liner. It will harden and interfere with the running clearance.
I.D. in 1/16" Increments
O.D. in 1/16" Increments
Length in 1/8" Increments
PS: Precision Sleeve Bearing
2. Freeze the bearings at 0°F (-17.75°C) for 30-45 minutes. Using gloves, remove the bearings from the freezer and slip them into the housing. As they heat to room temperature, full contact between the bearing and housing will be achieved. The greatest advantage to this technique over traditional pressing is greater accuracy in alignment.
Note: Lengths not listed above must be specially quoted. Additional sizes are available within our online configurator.
Configure Online
Only certified Simplicity 60 Plus Shafting provides maximum linear bearing performance. Inch Series–page 52 Metric Series–page 90
26 Round Shaft Technology • pbclinear.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online