Ordering Information Linear Ball Bearings
Ball Bearings
Flange Type No Entry - No Flange
SERIES IP - Standard Inch Series IPS - Self-Aligning Inch Series EP - ISO Metric Series KHP - ISO Metric Thin Wall Series JP - JIS Metric Series
Configure Online
F - Round Flange K - Square Flange Flange available only on EP, and JP series
Center Flange Location No Entry - No Flange C - Flange Center Mount Flange available only on EP, and JP series
Nominal Shaft Diameter English units in 16ths of an inch Metric units in mm
AJ
IP
10 G
–
Retainer Material G - Polymer cage No Entry - Not available G available only on IP, EP, and JP series
Width No Entry - Standard width W - Double wide
Available only on IP, EP, and JP series
Note: Precision of inscribed circle diameters and outside diameters for the clearance adjustable type (…-AJ) and the open type (…-OP) indicates the value obtained before the corresponding type is subjected to cutting process.
Modification No Entry - Standard closed AJ - Adjustable OP - Open IPS available only closed or open KHP available only closed
Ball Bearing Pillow Blocks
IPP
12
G
Pillow Block Type IPP - Closed Inch Series IPPN - Open Inch Series
Retainer Material G - Polymer cage
Nominal Shaft Diameter English units in 16ths of an inch Metric units in mm
IPPW - Twin Closed Inch Series IPPWN - Twin Open Inch Series EPPM - Closed ISO Metric Series EPPMN - Open ISO Metric Series
Housing/Bearing Type B - Straight bore housing S - Self-aligning bearing and straight bore housing
pbclinear.com • Engineering Your Linear Motion Solutions 33
Made with FlippingBook - professional solution for displaying marketing and sales documents online