Shafting Steel, Stainless Steel & Ceramic Coated
Pre-Drilled & Tapped
Steel NIPDL • 440 Stainless Steel NIPDLxxSS • 316 Stainless Steel NIPDLxxSS316
Standard Hole Spacing Thread
Dia. Tolerance Class L in.
Part No.
Nominal Dia.
Max Length
Weight Per Inch
440 Stainless Steel
316 Stainless Steel
Steel
in.
MIN MAX X Y
in.
lb.
NIPDL08 NIPDL08SS NIPDL08SS316 1/2" NIPDL10 NIPDL10SS NIPDL10SS316 5/8" NIPDL12 NIPDL12SS NIPDL12SS316 3/4" NIPDL16 NIPDL16SS NIPDL16SS316 1"
0.49900.499542 6-321440.055 0.62400.624542 8-321440.086 0.74900.74956 3 10-32144 0.125
0.99900.99956 3 1/4-20144 0.222 NIPDL20 NIPDL20SS NIPDL20SS316 1-1/4" 1.24901.2495 6 3 5/16-18144 0.348 NIPDL24NIPDL24SSNIPDL24SS3161-1/2"1.49891.49948 4 3/8-16132 0.500 NIPDL32 NIPDL32SS NIPDL32SS316 2" 1.99871.99948 4 1/2-13132 0.890 NIPDL48 * * 3" 2.9983 2.9992 8 4 3/4-10 132 2.003 Part Numbers are complete when Length and Type are added. Example: NIPDL16SS-024.000-SL is the complete Part Number for a 1 inch diameter 440 Stainless Steel shaft of 24 inches *Special orders avaiable on this option.
y x
Notes: (1) Specify length in part number using inches. Example: for 1/2" shafting at a length of 15" = NIPDL08-015.000 (3) Customer specifies 'y' dimension, if different than standard. Hole-to-hole tolerance = +/-0.015". (4) Consult factory for chrome plated or 303 stainless steel shafting.
Ceramic Coated • Aluminum alloy base material • Optimized for FrelonGOLD® liners • Interchanges with solid and pre-drilled shafting • Non-magnetic and vibration resistant • Weld splatter, paints, and contaminants will not stick • Ceramic-like coating provides hardness up to RC70 and increased corrosion resistance • NOT to be used with linear ball bearings ( Does not apply to linear guide products – MR, UG, UGA, etc ) • NOT compatible with linear ball bearings or roller pillow block assemblies Length tolerance: 3/16" – 1-1/4" shaft = +/- 0.030"
y x
1-3/8" – 2" shaft = +/- 0.060" 2-1/2" – 4" shaft = +/- 0.125"
Solid Shafting CC
Pre-Drilled & Tapped CCPDL
Standard Hole Spacing
Nominal Dia.
Diameter Tolerance
Nominal Dia.
Diameter Tolerance
MAX Length Weight
MAX Length Weight
Part No.
in.
MIN
MAX
in.
lb./in. 0.003 0.005 0.010 0.019 0.030 0.043 0.077 0.120 0.173 0.308
Part No.
Thread
in.
MIN MAX X Y
in.
lb./in.
CC03-xxx.xxx CC04-xxx.xxx CC06-xxx.xxx CC08-xxx.xxx CC10-xxx.xxx CC12-xxx.xxx CC16-xxx.xxx CC20-xxx.xxx CC24-xxx.xxx CC32-xxx.xxx
3/16"
0.1863 0.1871 0.2488 0.2496 0.3738 0.3746 0.4988 0.4996 0.6238 0.6246 0.7488 0.7496 0.9988 0.9996 1.2488 1.2496 1.4987 1.4995 1.9985 1.9995
138 138 138 138 138 138 138 138 138 138
CCPDL08-xxx.xxx 1/2" CCPDL10-xxx.xxx 5/8" CCPDL12-xxx.xxx 3/4" CCPDL16-xxx.xxx 1"
0.49880.499642 6-321380.019 0.62380.624642 8-321380.030 0.74880.749663 10-32138 0.043
1/4" 3/8" 1/2" 5/8" 3/4"
0.99880.999663 1/4-20138 0.077 CCPDL20-xxx.xxx 1-1/4"1.24881.24966 3 5/16-18138 0.120 CCPDL24-xxx.xxx1-1/2"1.49871.499584 3/8-16138 0.173 CCPDL32-xxx.xxx 2" 1.99851.999584 1/2-13138 0.308
1"
1-1/4" 1-1/2"
Notes: (1) Specify length in part number using inches. Example: for 1/2" shafting total length 36" long = CCPDL08-036.000. (2) Ends of cut-to-length shafting are not coated.
2"
Notes: (1) Specify length in part number using inches.
(3) Fully coated shafting is available on special request. (4) Counterbore 0.063" from top. (5) Customer specifies 'y' dimension, if different than standard.
54 Round Shaft Technology • pbclinear.com Example: for 1/2" shafting total length 36" long = CC08-036.000. (2) Ends of cut-to-length shafting are not coated. (3) Fully coated shafting is available on special request.
Made with FlippingBook - professional solution for displaying marketing and sales documents online