Round Shafting Stainless Steel & Ceramic Coated
Steel NIPDM • 440 Stainless Steel NIPDMxxSS Pre-Drilled & Tapped
y x
Standard Hole Spacing
Dia. Tolerance mm
Nominal Dia.
Max Length Weight
Part No.
Thread mm Kg/M NIPDM12-xxxx NIPDM12SS-xxxx 12 11.9888 12 120 60 M4 x .7 4597 0.89 NIPDM16-xxxx NIPDM16SS-xxxx 16 15.9893 16 150 75 M5 x .8 4597 1.57 NIPDM20-xxxx NIPDM20SS-xxxx 20 19.9873 20 150 75 M6 x 1.0 4597 2.45 NIPDM25-xxxx NIPDM25SS-xxxx 25 24.9885 25 200 100 M8 x 1.25 4902 3.80 NIPDM30-xxxx NIPDM30SS-xxxx 30 29.9872 30 200 100 M10 x 1.5 4597 5.50 NIPDM40-xxxx NIPDM40SS-xxxx 40 39.9872 40 200 100 M10 x 1.5 4496 9.80 NIPDM50-xxxx NIPDM50SS-xxxx 50 49.9846 50 200 100 M12 x 1.75 4496 15.30 Steel Stainless Steel mm MIN MAX X Y
Notes: (1) Specify length in part number using mm.
Example: for 12 mm shafting total length 97 mm = NIPDM12-0097. (2) Customer specifies 'y' dimension, if different than standard. Hole-to-hole tolerance = +/-.015". (3) Consult factory for chrome plated, 303, or 316 stainless steel shafting.
Ceramic Coated
y x
• Aluminum alloy base material • RC 70 ceramic coated finish • Designed to run with Simplicity ® FrelonGOLD ® lined bearings • Interchanges with solid and pre-drilled shafting • Non-magnetic and vibration resistant • Weld splatter, paints, and contaminants will not stick • NOT compatible with linear ball bearings • Length tolerance:
4 mm – 30 mm shaft = +/- 0.8 mm 40 mm – 50 mm shaft = +/- 1.6 mm 60 mm – 80 mm shaft = +/- 3.2 mm
Solid Shafting CCM
Pre-Drilled & Tapped CCMDL
Standard Hole Spacing
Dia. Tolerance mm
Nominal Dia.
MAX Length
Dia. Tolerance mm
Nominal Dia.
MAX Length Weight
Weight
Part No.
mm MIN
MAX
mm
Kg/M 0.04 0.07 0.10 0.15 0.26 0.41 0.63 0.92 1.63 2.55
Part No.
Thread
mm MIN MAX X Y
mm Kg/M
CCM06-xxxx CCM08-xxxx CCM10-xxxx CCM12-xxxx CCM16-xxxx CCM20-xxxx CCM25-xxxx CCM30-xxxx CCM40-xxxx CCM50-xxxx
6 8
5.992 7.991 9.991
6 8
3500 3500 3500 3500 3500 3500 3500 3500 3500 3500
Notes: (1) Specify length in part number using mm. Example: for 10 mm shafting total length 97 mm = CCMDL08- 0097. (2) Ends of cut-to-length shafting are not coated. (3) Fully coated shafting is available on special request. (4) Customer specifies 'y' dimension, if different than standard. 8 7.991 8 101.6 50.8 M2 x .4 3500 0.07 CCMDL10-xxxx 10 9.991 10 101.6 50.8 M3 x .5 3500 0.10 CCMDL12-xxxx 12 11.989 12 120 60 M4 x .7 3500 0.15 CCMDL16-xxxx 16 15.989 16 150 75 M5 x .8 3500 0.26 CCMDL20-xxxx 20 19.987 20 150 75 M6 x 1.0 3500 0.41 CCMDL25-xxxx 25 24.987 25 200 100 M8 x 1.25 3500 0.63 CCMDL30-xxxx 30 29.987 30 200 100 M10 x 1.5 3500 0.92 CCMDL08-xxxx
10 12 16 20 25 30 40 50
10 12 16 20 25 30 40 50
11.989 15.989 19.987 24.987 29.987 39.984 49.984
Notes: (1) Specify length in part number using mm.
Example: for 8 mm shafting total length 97 mm = CCM08-0097. (2) Ends of cut-to-length shafting are not coated. (3) Fully coated shafting is available on special request.
92 Round Shaft Technology • pbclinear.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online