Shafting Low Support Rails
The AISI C-1018 steel LSRM shaft support is a low support rail with a reduced footprint, and 40% lower profile than other support rails. This is an excellent choice for applications requiring compact low shaft support. The standard length for LSRM type supports is 1200 mm. No coating Length tolerance +0 mm/3 mm. Shaft Diameter Low Support Rail – Steel LSRM
Weight per 1219 mm (approximate)
Assemply Weight per 1200 mm (approximate)
Standard Hole spacing pre-drilled
Shaft Dia.
A
B
C
D
Assembly Part No.
Part No. LSRM12
mm +/-0.05 +/-0.05 +/-0.05 Hole Size X Y
Kg
Kg
LSRAM-12 12 13.91 9.40 8.66 M4 120 60 0.599
1.79
LSRM12PD LSRM16 LSRM16PD LSRM20 LSRM20PD LSRM25 LSRM25PD LSRM30 LSRM30PD LSRM40 LSRM40PD LSRM50 LSRM50PD
LSRAM-16 16 17.54 11.43 10.46 M5 150 75 0.884
2.76
LSRAM-20 20 19.58 12.95 10.46 M6 150 75 1.020
3.61
LSRAM-25 25 25.22 17.53 14.22 M8 200 100 1.980
5.86
20˚
LSRAM-30 30 29.26 19.81 15.9 M10 200 100 2.480
8.80
A
C
D
LSRAM-40 40 35.96 23.62 17.86 M10 200 100 3.340
12.70
B
LSRAM-50 50 44.02 29.97 21.46 M12 200 100 5.030
21.98
LSRAM
LSRM
D (Hole Diameter)
60 120
LSRM12PD
How to order
1200
• Available as cut to lenght options up to a max length of 3657 mm. Example: 1200 mm would be LSRM16-1200-SL
75
150
D (Hole Diameter)
LSRM16PD LSRM20PD
• If standard mounting holes are required, specify low shaft rails with pre-drilled mounting holes by part number. For example, LSRM12PD. Hole sizes and spacings are shown in the table. • If other than standard hole spacing is required, please provide drawings with all dimensions, tolerances, and quantity. With or without mounting holes, low shaft rails will be supplied in 1200 mm lengths when ordered by part number.
1200
100
200
D (Hole Diameter)
LSRM25PD LSRM30PD LSRM40PD LSRM50PD
1200
Low Support Rail & Shaft Set LSG
Shaft Dia.
Weight per in.
H
B
Y
X
N
Precision case hardened and ground shaft, plus an LSR steel support rail, effectively doubles the life of the shaft by allowing it to be turned over for a fresh surface when wear becomes evident. Both sides of the shaft are counterbored so the shaft may be rotated 180°, and rebolted for use on the new side. This guide is sold as a two-piece set; the shaft and support are not assembled. The guide is then bolted down through the top of the shaft to reduce installation time. The shafts are also available in 440C stainless steel. Drilled through and counterbored shafts may not be suitable for all linear bearings. No coating
Part No. LSGM16 LSGM20 LSGM25 LSGM30 LSGM40 LSGM50
mm mm mm mm mm mm
Kg
16 20 25 30 40 50
17.54 11.43 19.58 12.95
75 75
150 150
#5 #6
2.36 3.05 5.55
25.22 17.53 100 200 #10
29.26 19.81 100 200 5/16 8.11 35.96 23.62 100 200 3/8 11.43 44.02 29.97 100 200 1/2 19.98
Note: Customer specifies 'y' dimension.
y
x
N
H
94 Round Shaft Technology • pbclinear.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online