14” METAL CUTTING DISC FLAT
12” METAL CUTTING DISC FLAT
4-1/2” CONTINUOUS RIM DIAMOND DISC
Package dimensions: 30x30x2cm (5). Maximum operating speed: 5,100rpm, 80m/s. Flat centre. Complies with standard EN12413. For use with mains 300mm cut off machine.
Package dimensions: 35x35x0.5m Maximum operating speed: 4,400rpm, 80m/s Flat centre, complies with standard en12413. For use with mains 350mm cut off machine. For cutting mild steel and other ferrous metals.
Package dimensions: 12.5x12.5x1cm Maximum operating speed: 13,000rpm, 80m/s. Flat centre. Not suitable for metal or abrasive materials. For cutting floor & wall tiles, including ceramic, porcelain marble & terracotta. For use with mains & cordless.15mm angle grinders.
STOCK CODE : AB034
STOCK CODE : AB036
STOCK CODE : AB039
4-1/2” MORTAR RAKING DISC
8MM DIAMOND MORTAR RAKING DISC
4-1/2” SEGMENTED DIAMOND CUTTING DISC
Package dimensions: 18x15x1cm Max operating speed: 13,300rpm, 80m/s. Mpa certificate: 20810. Flat centre. Used for removal of mortar without damaging masonry. Average lifespan: 300 square metres of brick work. For use with 15mm angle grinders.
Package dimensions: 12.5x12.5x1cm Maximum operating speed: 13,000rpm, 80m/s. Mpa certificate: 90506a. Flat centre. Dry cutting. Not suitable for cutting metal. Suitable for most general building materials. For use with mains, air or cordless. 15mm angle grinders.
Package dimensions: 18x15.5x1.5cm For removing mortar without damage to masonry with care. Not suitable for cutting or grinding metal. Max. operating speed 13200 rpm. Used for removal of mortar without damaging masonry. For use with 15mm angle grinders.
STOCK CODE : AB090
STOCK CODE : AB166
STOCK CODE : AB038
12” SEGMENTED DIAMOND CUT DISC
9” TURBO WET & DRY DIAMOND DISC
9” SEGMENTED DIAMOND DISC
Package dimensions: 34x31x1cm Max speed: 5,100rpm, 80m/s. Mpa certificate: 90506a. Flat centre. Comes with a reducer ring for 20mm. Not suitable for cutting metal or very hard or very soft materials such as granite or chalk. Dry cut only. For use with cut off saws.
Package dimensions: 24x24x1cm. Max speed: 6,600rpm, 80m/s. Mpa certificate: 20810. Flat centre. Not suitable for metal. For wet & dry cutting of roof tiles, high density block, kerb stones,patio slabs, pipes & brick. For best results, cut from wet. For use with angle grinders.
Package dimensions: 24x23.5x1cm Max. operating speed: 6,600rpm, 80m/s. Mpa certificate: 20812. Not suitable for metal. Suitable for cutting most building materials including concrete, paving slabs, concrete pipes & bricks. For use with mains 230mm angle grinders.
STOCK CODE : AB042
STOCK CODE : AB041
STOCK CODE : AB040
Made with FlippingBook - Online catalogs