3 Axces Lifting Systems Catalogue 2024 - Update_10_23

Type of lifting system Page

1 Axces Hydraman 2 Axces Hydraman Alu

3.1.1 3.2.1

3 Axces Hydratwin

3.3.1

4 Axces Hydramatic 5 Axces Hydramax

3.4.1 3.5.1

6 Options & variations

3.6.1

3.1.1

AXCES HYDRAMAN

1 2 3

Hydraman pump

Hydraman Set Connect

Hydraman Set Lift & Drive

3.1.2

SET LIFT & DRIVE

HYDRAMAN PUMP

SET CONNECT

FRONT VIEW SIDE VIEW 1

PART NR. Hydraman pump 500mm 802-01007 • Each pump must be combined with a Set Connect or a Set Lift & Drive • The mounting set for the pump is included in the Set Connect or in the Set Lift & Drive • Maximum pressure = 250 bar | Maximum weight per pillar = 250 kg • Recommended oil HLP 46 or HLP 68

PART NR. 144-10109

PART NR. 144-10095

Set Lift & Drive Type 1

Set Connect Type 1 *Pin only required for rear side Set Connect Type 2

*Pin only required for rear side

Set Lift & Drive Type 2

144-10266

144-10247

3.1.3

3.2.1

AXCES HYDRAMAN ALU

1 2 3

Hydraman pump

Hydraman Set Connect

Hydraman Set Lift & Drive

3.2.2

HYDRAMAN PUMP

SET CONNECT HYDRAMAN ALU SET LIFT & DRIVE HYDRAMAN ALU

FRONT VIEW SIDE VIEW

PART NR. Hydraman pump 500mm 802-01207 • Each pump must be combined with a Set Connect or a Set Lift & Drive • The mounting set for the pump is included in the Set Connect or in the Set Lift & Drive • Maximum pressure = 250 bar | Maximum weight per pillar = 250 kg • Recommended oil HLP 46 or HLP 68

PART NR. 144-10266

Set Lift & Drive Type 2

PART NR. 144-10247

Set Connect Type 2

*Pin only required for rear side

Set Lift & Drive PRO

144-10258

*Pin only required for rear side

3.2.3

3.3.1

AXCES HYDRATWIN

1 2 3

Hydratwin pump

Hydratwin Set Connect

Hydratwin Set Lift & Drive

3.3.2

SET LIFT & DRIVE

HYDRATWIN PUMP

SET CONNECT

PART NR.

Hydratwin pump and cylinder 144-10097 • Each pump must be combined with a Set Connect or a Set Lift & Drive • The mounting set for the pump is included in the Set Connect or in the Set Lift & Drive • The 2 connectors male G 1/4” 90° (*) and oil duct (**) are not supplied • Maximum pressure = 250 bar | Maximum weight per pillar = 250 kg • Recommended oil HLP 46 or HLP 68

PART NR. 144-10113

PART NR. 144-10107

Set Lift & Drive Type 1

Set Connect Type 1 *Pin only required for rear side Set Connect Type 2

*Pin only required for rear side

Set Lift & Drive Type 2

144-10262

144-10259

3.3.3

3.4.1

AXCES HYDRAMATIC S1

1 2

Hydramatic pump-unit

Cylinder 500 SE

3* 4*

Set Connect

Set Lift & Drive

Connector S1

Mounting set pump

* Not visible on the drawing above

3.4.2

4 SET LIFT & DRIVE

2 CYLINDER

1 HYDRAMATIC PUMP-UNIT

3 SET CONNECT

FRONT VIEW

SIDE VIEW

PART NR. Cylinder 500 SE 802-05004 • Each pump must be combined with a Set Connect or a Set Lift & Drive • The mounting set for the pump is included in the Set Connect or in the Set Lift & Drive

PART NR. Hydramatic pump-unit 1,5l 802-01011 • Possible to lift each side separately or both sides at the same time; cylinders will rise in random order • Suitable for chassis width ≥2.550mm and/or chassis length ≥ 5.000mm • Recommended oil HLP 46 or HLP 68

PART NR. 1 Set Lift & Drive Type 1 144-10109 *Pin only required for rear side 2 Set Lift & Drive Type 2 144-10266

PART NR.

Set Connect Type 1 144-10095 *Pin only required for rear side Set Connect Type 2 144-10247

• Maximum lifting height = 500mm • Maximum lifting weight = 250 kg One cylinder per corner

3.4.3

CONNECTOR S1

MOUNTING SET PUMP-UNIT

PART NR. 802-06001

PART NR. 144-10164

OPTIONAL

1 connector per 2 cylinders

3.4.4

3.4.5

1 3

AXCES HYDRAMATIC S2

1 2 3

Hydramatic pump-unit

Cylinder 500 SE

Cylinder 500 DE

4* 5* 6*

Set Connect

Set Lift & Drive

Mounting set pump

* Not visible on the drawing above

3.4.6

2 CYLINDER 500 SE

1 HYDRAMATIC PUMP-UNIT

3 CYLINDER 500 DE

FRONT VIEW

SIDE VIEW

PART NR.

Cylinder 500 SE 802-05004 • Each pump must be combined with a Set Connect or a Set Lift & Drive • The mounting set for the pump is included in the Set Connect or in the Set Lift & Drive

PART NR. 802-01011

Cylinder 500 DE 802-05005 • Each pump must be combined with a Set Connect or a Set Lift & Drive • The mounting set for the pump is included in the Set Connect or in the Set Lift & Drive

Hydramatic pump-unit 1,5l

• Possible to lift each side separately or both sides at the same time; cylinders will rise in random order • Suitable for chassis width ≥2.550mm and/or chassis length ≥ 5.000mm • Recommended oil to be used = HLP 46 or HLP 68

• Maximum lifting height = 500mm • Maximum lifting weight = 250 kg One cylinder per corner

3.4.7

5 SET LIFT & DRIVE

4 SET CONNECT

6 MOUNTING SET PUMP-UNIT

PART NR. 144-10164

OPTIONAL

PART NR. 144-10109

PART NR. 144-10095

Set Lift & Drive Type 1

Set Connect Type 1 *Pin only required for rear side Set Connect Type 2

*Pin only required for rear side

Set Lift & Drive Type 2

144-10266

144-10247

3.4.8

3.4.9

3.5.1

AXCES HYDRAMAX2

Hydramax pump-unit

Operating switch

Cylinder

4* 5*

Set Connect

Set Lift & Drive

* Not visible on the drawing above

3.5.2

5 SET LIFT & DRIVE

1 HYDRAMAX PUMP-UNIT

3 CYLINDER

4 SET CONNECT

FRONT VIEW SIDE VIEW

SIDE VIEW

FRONT VIEW OIL CONNECTION

PART NR. Pump-unit 500mm 802-01014 • Possible to lift each side separately or both sides at the same time; cylinders will rise absolutely synchronized • 1 pump per truck • Oil and air ducts are not supplied by Versus-Omega • Recommended oil to be used = HLP 46 or HLP 68

2 OPERATING SWITCH

PART NR. Cylinder 500mm 802-05009 • Each cylinder must be combined with a Set Connect or a Set Lift & Drive

PART NR. 1 Set Lift & Drive Type 1 144-10109 *Pin only required for rear side 2 Set Lift & Drive Type 2 144-10266

PART NR. 1 Set Connect Type 1 144-10095 *Pin only required for rear side 2 Set Connect Type 2 144-10247

• Maximum lifting height = 500mm • Maximum lifting weight = 250 kg One cylinder per corner

PART NR. 802-07005

3.5.3

AXCES HYDRAMAX4

Hydramax pump-unit

Operating switch

Cylinder

4* 5*

Set Connect

Set Lift & Drive

* Not visible on the drawing above

3.5.4

5 SET LIFT & DRIVE

1 HYDRAMAX PUMP-UNIT

3 CYLINDER

4 SET CONNECT

FRONT VIEW SIDE VIEW

SIDE VIEW

FRONT VIEW OIL CONNECTION

PART NR. Pump-unit 500mm 802-01012 Pump-unit 1000mm 802-01015 • Possible to lift each side separately or both sides at the same time; cylinders will rise absolutely synchronized • 1 pump per truck • Recommended oil HLP 46 or HLP 68

2 OPERATING SWITCH

PART NR. Cylinder 500mm 802-05009 Cylinder 1000mm 802-05011

PART NR. 1 Set Lift & Drive Type 1 144-10109 *Pin only required for rear side 2 Set Lift & Drive Type 2 144-10266

PART NR. 1 Set Connect Type 1 144-10095 *Pin only required for rear side 2 Set Connect Type 2 144-10247

• Each cylinder must be combined with a Set Connect or a Set Lift & Drive

• Maximum lifting height = 500mm • Maximum lifting weight = 250 kg One cylinder per corner

PART NR. 802-07005

3.5.5

AXCES HYDRAMAX6

Hydramax pump-unit

Operating switch

Cylinder

4* 5*

Set Connect

Set Lift & Drive

* Not visible on the drawing above

3.5.6

5 SET LIFT & DRIVE

1 HYDRAMAX PUMP-UNIT

3 CYLINDER

4 SET CONNECT

FRONT VIEW SIDE VIEW

SIDE VIEW

FRONT VIEW OIL CONNECTION

PART NR. Pump-unit 500mm 802-01013 Pump-unit 1000mm 802-01016 • Possible to lift each side separately or both sides at the same time; cylinders will rise absolutely synchronized • 1 pump per truck • Recommended oil HLP 46 or HLP 68

2 OPERATING SWITCH

PART NR. Cylinder 500mm 802-05009 Cylinder 1000mm 802-05011

PART NR. 1 Set Lift & Drive Type 1 144-10109 *Pin only required for rear side 2 Set Lift & Drive Type 2 144-10266

PART NR. 1 Set Connect Type 1 144-10095 *Pin only required for rear side 2 Set Connect Type 2 144-10247

• Each cylinder must be combined with a Set Connect or a Set Lift & Drive

• Maximum lifting height = 500mm • Maximum lifting weight = 250 kg One cylinder per corner

PART NR. 802-07005

3.5.7

Options & variations

3.6.1

options & variations AXCES

SLIDER SET CONNECT

SUITABLE WITH Hydraman Hydraman ALU Hydrawin

PART NR. Slider 3x22x52mm L = 1400mm 802-04201

INSERT FOR SLIDER PROFILE

SUITABLE WITH Hydraman Hydratwin

PART NR. 802-10007

MOUNTING SET PUMP UNIT

SUITABLE WITH Hydramatic Type S1 Hydramatic Type S2

PART NR.

OPTIONAL

144-10164

3.6.2

options & variations AXCES

BRACKET LIFT & DRIVE PRO

SUITABLE WITH Hydraman ALU

PART NR. 802-10008

LIFTING SYSTEM POSITION PROFILE

SUITABLE WITH Hydraman ALU

PART NR. 802-10009

3.6.3

Versus-Omega BV

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38

Made with FlippingBook Online newsletter maker