CASES, HOLSTERS & HANGERS
C789 Meter and Accessory Case Large carrying case with three compartments, removable handle, and shoulder strap. Holds a meter and multiple accessories. • Made of durable polyester 600D • Dimensions (HxWxD): 308 mm × 256 mm × 77 mm
H15 Electrical Tester Holster Rugged fabric holster designed to hold Fluke T90, T110, T130 and T150 Two-Pole Testers. • High quality 1000D fabric • Dimensions (HxWxD): 279 mm × 92 mm × 51 mm
C11XT EVA Foam Hard Case Includes a large pocket on one side for multiple accessories and a mesh pocket on the other side for one test tool. • For use with 11x and 17x multimeters, and 32x clamp meters • Dimensions (HxWxD): 240 mm x 155 mm x 105 mm
H80M Protective Holster with Magnetic Hanging Strap Convenient snap-on holster with a magnetic hanging system enables hands-free work while protecting digital multimeters or calibration tools. • Includes a hanging magnet, general purpose hanger, and hook/loop straps • Dimensions (HxWxD): 190 mm × 95 mm × 43 mm
C37XT EVA Foam Hard Case Features a divider with elastic straps to hold one test tool, with two pockets and straps for accessories. Also includes space
C799 Soft Field Case For use with Fluke 750 Series Documenting Process Calibrators
to secure an iFlex ® probe. • Dimensions (HxWxD): 397 mm × 346 mm × 122 mm
• Allows instrument to be operated inside case with clear front protecting keyboard • Dimensions (HxWxD): 305 mm × 229 mm × 165 mm)
Hangers
Hard Cases
CXT Extreme Case Series • CXT1000: for multiple meters, accessories and other test tools (Dimensions (HxWxD): 343 mm × 465 mm × 178 mm • CXT1000 features a diced foam interior for custom storage configuration • Unbreakable, watertight, airtight, dust proof, chemical resistant and corrosion proof • CXT80: for use with 87V, 80 Series, 187/189, 27 II/28 II series • CXT170: for use with 170 Series, 114/115/116/117, 77 III, and 77 IV • CXT280: for use with 287 or 289 • Dimensions (HxWxD): 279 mm × 318 mm × 127 mm
C101 Hard Case Tough polypropylene case with configurable diced foam interior to store and protect tools and accessories. • Exterior dimensions (HxWxD): 305 mm × 360 mm × 105 mm
TPAK ToolPak™ Magnetic Meter Hanger Hang your meter in a variety of ways for convenient hands-free operation. Attaches to back of many Fluke meters, including 110/APAC, 170, 180, 280 Series, 83V and 87V DMMs, 724, 725 and 789 Process Calibrators, 70 Series III DMMs, 1503, 1507, 1577 and 1587 FC Insulation Multimeters and 50 Series II Digital Thermometers.
Holsters
High Frequency
C290 Hard Shell Protective Carry Case For use with Fluke 190 Series II ScopeMeters ® • Dimensions (HxWxD): 1245 mm × 939 mm × 368 mm
H5 Electrical Tester Holster Rugged fabric holster designed to hold Fluke T3 and T5 Electrical Testers. It features a built-in belt loop and flap for test lead storage. • Dimensions (HxWxD): 192 mm × 90 mm × 38 mm
85RF High Frequency Probe Converts a DC voltmeter with an input impedance of 10 megohms into a high frequency (100 kHz to 500 MHz) RF voltmeter. • Voltage range: 0.25 V to 3 V AC RMS • Maximum input: 30 V RMS, 200 V DC • AC to DC ratio: 1:1 • Ratio accuracy at 25 MHz and loaded with 10 megohms
C1600 Gear Box A rugged, molded plastic case with a deep interior and lift-out tray. • Includes five hook and loop straps to wrap cords and test leads • Dimensions (HxWxD): 260 mm × 390 mm × 200 mm
HT6 Holster For use with models T6-600 • Flap for test lead storage and built-in belt loop
176
Fluke Accessories
Made with FlippingBook Learn more on our blog